Provide a macro to define the reverse channel amplitude to be used to compensate the remote serializer noise immunity. While at it, update a comment. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- drivers/media/i2c/max9286.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index ed1cdefe7c30..9124d5fa6ea3 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -113,6 +113,7 @@ #define MAX9286_REV_TRF(n) ((n) << 4) #define MAX9286_REV_AMP(n) ((((n) - 30) / 10) << 1) /* in mV */ #define MAX9286_REV_AMP_X BIT(0) +#define MAX9286_REV_AMP_HIGH 170 /* Register 0x3f */ #define MAX9286_EN_REV_CFG BIT(6) #define MAX9286_REV_FLEN(n) ((n) - 20) @@ -567,12 +568,12 @@ static int max9286_notify_bound(struct v4l2_async_notifier *notifier, * channels: * * - Increase the reverse channel amplitude to compensate for the - * remote ends high threshold, if not done already + * remote ends high threshold * - Verify all configuration links are properly detected * - Disable auto-ack as communication on the control channel are now * stable. */ - max9286_reverse_channel_setup(priv, 170); + max9286_reverse_channel_setup(priv, MAX9286_REV_AMP_HIGH); max9286_check_config_link(priv, priv->source_mask); /* -- 2.30.0
