Re: [PATCH v5 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
> 
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
> v4->v5:
> * Newly introduced in v5. (Rob)
> 
>  .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml   | 202 +++++++++++++++++++++
>  1 file changed, 202 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> new file mode 100644
> index 00000000..0e724d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> @@ -0,0 +1,202 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
> +
> +maintainers:
> +  - Liu Ying <victor.liu@xxxxxxx>
> +
> +description: |
> +  As a system controller, the Freescale i.MX8qm/qxp Control and Status
> +  Registers(CSR) module represents a set of miscellaneous registers of a
> +  specific subsystem.  It may provide control and/or status report interfaces
> +  to a mix of standalone hardware devices within that subsystem.  One typical
> +  use-case is for some other nodes to acquire a reference to the syscon node
> +  by phandle, and the other typical use-case is that the operating system
> +  should consider all subnodes of the CSR module as separate child devices.
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - fsl,imx8qxp-mipi-lvds-csr
> +          - fsl,imx8qm-lvds-csr

You shouldn't need this, we filter out 'syscon' and 'simple-mfd'.

> +  required:
> +    - compatible
> +
> +properties:
> +  $nodename:
> +    pattern: "^syscon@[0-9a-f]+$"
> +
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx8qxp-mipi-lvds-csr
> +          - fsl,imx8qm-lvds-csr
> +      - const: syscon
> +      - const: simple-mfd
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: ipg
> +
> +patternProperties:
> +  "^(ldb|phy|pxl2dpi)$":
> +    type: object
> +    description: The possible child devices of the CSR module.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qxp-mipi-lvds-csr
> +    then:
> +      required:
> +        - pxl2dpi
> +        - ldb
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8qm-lvds-csr
> +    then:
> +      required:
> +        - phy
> +        - ldb
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8-lpcg.h>
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +    mipi_lvds_0_csr: syscon@56221000 {
> +        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
> +        reg = <0x56221000 0x1000>;
> +        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
> +        clock-names = "ipg";
> +
> +        mipi_lvds_0_pxl2dpi: pxl2dpi {
> +            compatible = "fsl,imx8qxp-pxl2dpi";
> +            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
> +            power-domains = <&pd IMX_SC_R_MIPI_0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
> +                        reg = <0>;
> +                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
> +                    };
> +
> +                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
> +                        reg = <1>;
> +                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    reg = <1>;
> +
> +                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
> +                        reg = <0>;
> +                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
> +                    };
> +
> +                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
> +                        reg = <1>;
> +                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
> +                    };
> +                };
> +            };
> +        };
> +
> +        mipi_lvds_0_ldb: ldb {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            compatible = "fsl,imx8qxp-ldb";
> +            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
> +                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
> +            clock-names = "pixel", "bypass";
> +            power-domains = <&pd IMX_SC_R_LVDS_0>;
> +
> +            channel@0 {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                reg = <0>;
> +                phys = <&mipi_lvds_0_phy>;
> +                phy-names = "lvds_phy";
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
> +                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    /* ... */
> +                };
> +            };
> +
> +            channel@1 {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                reg = <1>;
> +                phys = <&mipi_lvds_0_phy>;
> +                phy-names = "lvds_phy";
> +
> +                port@0 {
> +                    reg = <0>;
> +
> +                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
> +                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +
> +                    /* ... */
> +                };
> +            };
> +        };
> +    };
> +
> +    mipi_lvds_0_phy: phy@56228300 {
> +        compatible = "fsl,imx8qxp-mipi-dphy";
> +        reg = <0x56228300 0x100>;
> +        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
> +        clock-names = "phy_ref";
> +        #phy-cells = <0>;
> +        fsl,syscon = <&mipi_lvds_0_csr>;
> +        power-domains = <&pd IMX_SC_R_MIPI_0>;
> +    };
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux