And I forgot to mention:
On Fri, Mar 12, 2021 at 03:42:14AM +0200, Laurent Pinchart wrote:
> Hi Christoph and Ricardo,
>
> Thank you for the patch.
>
> On Mon, Mar 01, 2021 at 09:52:36AM +0100, Christoph Hellwig wrote:
> > From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> >
> > On architectures where the is no coherent caching such as ARM use the
>
> s/the is/there is/
>
> > dma_alloc_noncontiguos API and handle manually the cache flushing using
>
> s/dma_alloc_noncontiguos/dma_alloc_noncontiguous/
>
> (and in the subject line too)
>
> > dma_sync_sgtable().
> >
> > With this patch on the affected architectures we can measure up to 20x
> > performance improvement in uvc_video_copy_data_work().
Wow, great work ! :-)
> >
> > Eg: aarch64 with an external usb camera
> >
> > NON_CONTIGUOUS
> > frames: 999
> > packets: 999
> > empty: 0 (0 %)
> > errors: 0
> > invalid: 0
> > pts: 0 early, 0 initial, 999 ok
> > scr: 0 count ok, 0 diff ok
> > sof: 2048 <= sof <= 0, freq 0.000 kHz
> > bytes 67034480 : duration 33303
> > FPS: 29.99
> > URB: 523446/4993 uS/qty: 104.836 avg 132.532 std 13.230 min 831.094 max (uS)
> > header: 76564/4993 uS/qty: 15.334 avg 15.229 std 3.438 min 186.875 max (uS)
> > latency: 468945/4992 uS/qty: 93.939 avg 132.577 std 9.531 min 824.010 max (uS)
> > decode: 54161/4993 uS/qty: 10.847 avg 6.313 std 1.614 min 111.458 max (uS)
> > raw decode speed: 9.931 Gbits/s
> > raw URB handling speed: 1.025 Gbits/s
> > throughput: 16.102 Mbits/s
> > URB decode CPU usage 0.162600 %
> >
> > COHERENT
> > frames: 999
> > packets: 999
> > empty: 0 (0 %)
> > errors: 0
> > invalid: 0
> > pts: 0 early, 0 initial, 999 ok
> > scr: 0 count ok, 0 diff ok
> > sof: 2048 <= sof <= 0, freq 0.000 kHz
> > bytes 54683536 : duration 33302
> > FPS: 29.99
> > URB: 1478135/4000 uS/qty: 369.533 avg 390.357 std 22.968 min 3337.865 max (uS)
> > header: 79761/4000 uS/qty: 19.940 avg 18.495 std 1.875 min 336.719 max (uS)
> > latency: 281077/4000 uS/qty: 70.269 avg 83.102 std 5.104 min 735.000 max (uS)
> > decode: 1197057/4000 uS/qty: 299.264 avg 318.080 std 1.615 min 2806.667 max (uS)
> > raw decode speed: 365.470 Mbits/s
> > raw URB handling speed: 295.986 Mbits/s
> > throughput: 13.136 Mbits/s
> > URB decode CPU usage 3.594500 %
> >
> > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > Reviewed-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
> > Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> > ---
> > drivers/media/usb/uvc/uvc_video.c | 79 ++++++++++++++++++++++---------
> > drivers/media/usb/uvc/uvcvideo.h | 4 +-
> > 2 files changed, 60 insertions(+), 23 deletions(-)
> >
> > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> > index f2f565281e63ff..d008c68fb6c806 100644
> > --- a/drivers/media/usb/uvc/uvc_video.c
> > +++ b/drivers/media/usb/uvc/uvc_video.c
> > @@ -6,11 +6,13 @@
> > * Laurent Pinchart (laurent.pinchart@xxxxxxxxxxxxxxxx)
> > */
> >
>
> Should we include <linux/dma-mapping.h> ?
>
> > +#include <linux/highmem.h>
> > #include <linux/kernel.h>
> > #include <linux/list.h>
> > #include <linux/module.h>
> > #include <linux/slab.h>
> > #include <linux/usb.h>
> > +#include <linux/usb/hcd.h>
> > #include <linux/videodev2.h>
> > #include <linux/vmalloc.h>
> > #include <linux/wait.h>
> > @@ -1096,6 +1098,26 @@ static int uvc_video_decode_start(struct uvc_streaming *stream,
> > return data[0];
> > }
> >
> > +static inline struct device *stream_to_dmadev(struct uvc_streaming *stream)
> > +{
> > + return bus_to_hcd(stream->dev->udev->bus)->self.sysdev;
> > +}
> > +
> > +static void uvc_urb_dma_sync(struct uvc_urb *uvc_urb, bool for_device)
> > +{
> > + struct device *dma_dev = stream_to_dmadev(uvc_urb->stream);
> > +
> > + if (for_device) {
> > + dma_sync_sgtable_for_device(dma_dev, uvc_urb->sgt,
> > + DMA_FROM_DEVICE);
>
> The uvcvideo driver also supports video output devices (they are fairly
> rare, but they exist). We thus need to handle DMA_TO_DEVICE too.
>
> > + } else {
> > + dma_sync_sgtable_for_cpu(dma_dev, uvc_urb->sgt,
> > + DMA_FROM_DEVICE);
> > + invalidate_kernel_vmap_range(uvc_urb->buffer,
> > + uvc_urb->stream->urb_size);
> > + }
> > +}
> > +
> > /*
> > * uvc_video_decode_data_work: Asynchronous memcpy processing
> > *
> > @@ -1117,6 +1139,8 @@ static void uvc_video_copy_data_work(struct work_struct *work)
> > uvc_queue_buffer_release(op->buf);
> > }
> >
> > + uvc_urb_dma_sync(uvc_urb, true);
> > +
> > ret = usb_submit_urb(uvc_urb->urb, GFP_KERNEL);
> > if (ret < 0)
> > dev_err(&uvc_urb->stream->intf->dev,
> > @@ -1541,10 +1565,12 @@ static void uvc_video_complete(struct urb *urb)
> > * Process the URB headers, and optionally queue expensive memcpy tasks
> > * to be deferred to a work queue.
> > */
> > + uvc_urb_dma_sync(uvc_urb, false);
> > stream->decode(uvc_urb, buf, buf_meta);
> >
> > /* If no async work is needed, resubmit the URB immediately. */
> > if (!uvc_urb->async_operations) {
> > + uvc_urb_dma_sync(uvc_urb, true);
> > ret = usb_submit_urb(uvc_urb->urb, GFP_ATOMIC);
> > if (ret < 0)
> > dev_err(&stream->intf->dev,
> > @@ -1560,24 +1586,46 @@ static void uvc_video_complete(struct urb *urb)
> > */
> > static void uvc_free_urb_buffers(struct uvc_streaming *stream)
> > {
> > + struct device *dma_dev = stream_to_dmadev(stream);
> > struct uvc_urb *uvc_urb;
> >
> > for_each_uvc_urb(uvc_urb, stream) {
> > if (!uvc_urb->buffer)
> > continue;
> >
> > -#ifndef CONFIG_DMA_NONCOHERENT
> > - usb_free_coherent(stream->dev->udev, stream->urb_size,
> > - uvc_urb->buffer, uvc_urb->dma);
> > -#else
> > - kfree(uvc_urb->buffer);
> > -#endif
> > + dma_vunmap_noncontiguous(dma_dev, uvc_urb->buffer);
> > + dma_free_noncontiguous(dma_dev, stream->urb_size, uvc_urb->sgt,
> > + DMA_FROM_DEVICE);
> > +
> > uvc_urb->buffer = NULL;
>
> Maybe also
>
> uvc_urb->sgt = NULL;
>
> ? It's not strictly mandatory, but may make use-after-free bugs easier
> to spot.
>
> > }
> >
> > stream->urb_size = 0;
> > }
> >
> > +static bool uvc_alloc_urb_buffer(struct uvc_streaming *stream,
> > + struct uvc_urb *uvc_urb, gfp_t gfp_flags)
> > +{
> > + struct device *dma_dev = stream_to_dmadev(stream);
> > +
> > +
>
> Extra blank line.
>
> > + uvc_urb->sgt = dma_alloc_noncontiguous(dma_dev, stream->urb_size,
> > + DMA_FROM_DEVICE, gfp_flags, 0);
> > + if (!uvc_urb->sgt)
> > + return false;
> > + uvc_urb->dma = uvc_urb->sgt->sgl->dma_address;
> > +
> > + uvc_urb->buffer = dma_vmap_noncontiguous(dma_dev, stream->urb_size,
> > + uvc_urb->sgt);
> > + if (!uvc_urb->buffer) {
> > + dma_free_noncontiguous(dma_dev, stream->urb_size,
> > + uvc_urb->sgt, DMA_FROM_DEVICE);
>
> Same here,
>
> uvc_urb->sgt = NULL;
>
> > + return false;
> > + }
> > +
> > + return true;
> > +}
> > +
> > /*
> > * Allocate transfer buffers. This function can be called with buffers
> > * already allocated when resuming from suspend, in which case it will
> > @@ -1608,19 +1656,11 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
> >
> > /* Retry allocations until one succeed. */
> > for (; npackets > 1; npackets /= 2) {
> > + stream->urb_size = psize * npackets;
>
> A blank line here would be nice.
>
> > for (i = 0; i < UVC_URBS; ++i) {
> > struct uvc_urb *uvc_urb = &stream->uvc_urb[i];
> >
> > - stream->urb_size = psize * npackets;
> > -#ifndef CONFIG_DMA_NONCOHERENT
> > - uvc_urb->buffer = usb_alloc_coherent(
> > - stream->dev->udev, stream->urb_size,
> > - gfp_flags | __GFP_NOWARN, &uvc_urb->dma);
> > -#else
> > - uvc_urb->buffer =
> > - kmalloc(stream->urb_size, gfp_flags | __GFP_NOWARN);
> > -#endif
> > - if (!uvc_urb->buffer) {
> > + if (!uvc_alloc_urb_buffer(stream, uvc_urb, gfp_flags)) {
> > uvc_free_urb_buffers(stream);
> > break;
> > }
> > @@ -1730,12 +1770,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream,
> > urb->context = uvc_urb;
> > urb->pipe = usb_rcvisocpipe(stream->dev->udev,
> > ep->desc.bEndpointAddress);
> > -#ifndef CONFIG_DMA_NONCOHERENT
> > urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
> > urb->transfer_dma = uvc_urb->dma;
> > -#else
> > - urb->transfer_flags = URB_ISO_ASAP;
> > -#endif
> > urb->interval = ep->desc.bInterval;
> > urb->transfer_buffer = uvc_urb->buffer;
> > urb->complete = uvc_video_complete;
> > @@ -1795,10 +1831,8 @@ static int uvc_init_video_bulk(struct uvc_streaming *stream,
> >
> > usb_fill_bulk_urb(urb, stream->dev->udev, pipe, uvc_urb->buffer,
> > size, uvc_video_complete, uvc_urb);
> > -#ifndef CONFIG_DMA_NONCOHERENT
> > urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
> > urb->transfer_dma = uvc_urb->dma;
> > -#endif
> >
> > uvc_urb->urb = urb;
> > }
> > @@ -1895,6 +1929,7 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream,
> >
> > /* Submit the URBs. */
> > for_each_uvc_urb(uvc_urb, stream) {
> > + uvc_urb_dma_sync(uvc_urb, true);
> > ret = usb_submit_urb(uvc_urb->urb, gfp_flags);
> > if (ret < 0) {
> > dev_err(&stream->intf->dev,
> > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> > index 97df5ecd66c9a7..fec24f1eca1c96 100644
> > --- a/drivers/media/usb/uvc/uvcvideo.h
> > +++ b/drivers/media/usb/uvc/uvcvideo.h
> > @@ -545,7 +545,8 @@ struct uvc_copy_op {
> > * @urb: the URB described by this context structure
> > * @stream: UVC streaming context
> > * @buffer: memory storage for the URB
> > - * @dma: DMA coherent addressing for the urb_buffer
> > + * @dma: Allocated DMA handle
> > + * @sgt: sgt_table with the urb locations in memory
> > * @async_operations: counter to indicate the number of copy operations
> > * @copy_operations: work descriptors for asynchronous copy operations
> > * @work: work queue entry for asynchronous decode
> > @@ -556,6 +557,7 @@ struct uvc_urb {
> >
> > char *buffer;
> > dma_addr_t dma;
> > + struct sg_table *sgt;
>
> A forward declaration of struct sg_table with the other forward
> declarations would be useful.
>
> >
> > unsigned int async_operations;
> > struct uvc_copy_op copy_operations[UVC_MAX_PACKETS];
--
Regards,
Laurent Pinchart
