[PATCH v2 00/10] Microship SAMA5D4 VPU support et al

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all

This series adds support for the Microchip SAMA5D4 VPU, which it based
on the Hantro G1.

The hardware can support up-to 1280x720 for each of the MPEG2, VP8 and
H264 codecs. There is only a single decoder and no encoders on the SoC.

The Hantro G1 post-processing is also enabled on the platform.

To minimise duplication, the series starts with a few small cleanups.


As you may have noticed, this is my first patches series to linux-media,
so any tips how to make this as smoother process are appreciated.


Changes in v2:
 - Add testing results in the cover letter (thanks Eze)
 - s/Atmel/Microchip/ through the series (thanks Nicolas)
 - Split defconfig change into separate commit (thanks Eze, Nicolas)
 - Added Reviewed-by and Fixes tags (thanks Philipp)
 - Split DT into separate commit, wrote binding document, fixup minor DT
   warnings (thanks Eze)
 - Rebased on top of 5.12-rc2, as per Linus' email to avoid 5.12-rc1
   https://lwn.net/Articles/848265/



Testing
-------

 - v4l-compliance

Command used:
  v4l2-compliance -m0

Output summary:

v4l2-compliance 1.21.0-4740, 32 bits, 32-bit time_t
v4l2-compliance SHA: f253495fa6de 2021-03-06 15:32:09

Compliance test for hantro-vpu device /dev/media0:

Total for hantro-vpu device /dev/media0: 8, Succeeded: 8, Failed: 0,
Warnings: 0

Compliance test for hantro-vpu device /dev/video0:

Total for hantro-vpu device /dev/video0: 46, Succeeded: 46, Failed: 0,
Warnings: 0


 - Post-processor testing

Command used:
  gst-launch-1.0 -v filesrc location=test.mp4  ! decodebin3 !
video/x-raw,format=YUY2 ! ...

Confirmed the VPU is used by observing the interrupts triggering, strace
showed extra v4l2 ioctls - VIDIOC_S_FMT(... V4L2_PIX_FMT_YUYV  ...)


 - MPEG2 testing, custom ffmpeg from
   https://github.com/Kwiboo/FFmpeg/commits/v4l2-request-hwaccel-4.3

Command used:
  ffmpeg -hwaccel drm -i mpeg2.mpeg2 -f rawvideo -pix_fmt yuv420p out.raw

Confirmed the VPU is used by observing the interrupts triggering, strace
showed the v4l2 ioctls being used plus played back the resulting file.


 - VP8 testing, using fluster

Command used:
  fluster.py run -ts VP8-TEST-VECTORS -d GStreamer-VP8-V4L2SL-Gst1.0

Output summary:

Running test suite VP8-TEST-VECTORS with decoder GStreamer-VP8-V4L2SL-Gst1.0
Ran 61 tests in 103.273s

FAILED (failures=9, errors=2)


 - H264 testing, using fluster

Command used:
  fluster.py run -ts JVT-AVC_V1 -d GStreamer-H.264-V4L2SL-Gst1.0

Output summary:

Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2SL-Gst1.0
Ran 135 tests in 420.444s

FAILED (failures=9, errors=55)


Looking forward to your feedback,
Emil


Emil Velikov (10):
  media: hantro: use G1_REG_INTERRUPT directly for the mpeg2
  media: hantro: imx: reuse MB_DIM define
  media: hantro: imx: remove duplicate dec_base init
  media: hantro: imx: remove unused include
  media: hantro: introduce hantro_g1.c for common API
  media: dt-bindings: Document SAMA5D4 VDEC bindings
  media: hantro: add initial SAMA5D4 support
  ARM: dts: sama5d4: enable Hantro G1 VDEC
  ARM: configs: at91: sama5: update with savedefconfig
  ARM: configs: at91: sama5: enable the Hantro G1 engine

 .../media/microchip,sama5d4-vdec.yaml         |  59 +++++++++
 arch/arm/boot/dts/sama5d4.dtsi                |   9 ++
 arch/arm/configs/sama5_defconfig              |  40 +++---
 drivers/staging/media/hantro/Kconfig          |  10 +-
 drivers/staging/media/hantro/Makefile         |   4 +
 drivers/staging/media/hantro/hantro_drv.c     |   3 +
 drivers/staging/media/hantro/hantro_g1.c      |  39 ++++++
 .../media/hantro/hantro_g1_mpeg2_dec.c        |   5 +-
 drivers/staging/media/hantro/hantro_hw.h      |   4 +
 drivers/staging/media/hantro/imx8m_vpu_hw.c   |  27 +---
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  36 +-----
 .../staging/media/hantro/sama5d4_vdec_hw.c    | 117 ++++++++++++++++++
 12 files changed, 274 insertions(+), 79 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
 create mode 100644 drivers/staging/media/hantro/hantro_g1.c
 create mode 100644 drivers/staging/media/hantro/sama5d4_vdec_hw.c

-- 
2.30.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux