[PATCH v2 54/77] media: imx: imx7-media-csi: Don't enable SOF and EOF interrupts

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

The SOF and EOF interrupts are not used. Don't enable them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
---
 drivers/staging/media/imx/imx7-media-csi.c | 30 ++++++++--------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
index 4a8d48495701..475c39b05f9a 100644
--- a/drivers/staging/media/imx/imx7-media-csi.c
+++ b/drivers/staging/media/imx/imx7-media-csi.c
@@ -240,15 +240,10 @@ static void imx7_csi_hw_enable_irq(struct imx7_csi *csi)
 {
 	u32 cr1 = imx7_csi_reg_read(csi, CSI_CSICR1);
 
-	cr1 |= BIT_SOF_INTEN;
 	cr1 |= BIT_RFF_OR_INT;
-
-	/* still capture needs DMA interrupt */
 	cr1 |= BIT_FB1_DMA_DONE_INTEN;
 	cr1 |= BIT_FB2_DMA_DONE_INTEN;
 
-	cr1 |= BIT_EOF_INT_EN;
-
 	imx7_csi_reg_write(csi, cr1, CSI_CSICR1);
 }
 
@@ -256,11 +251,9 @@ static void imx7_csi_hw_disable_irq(struct imx7_csi *csi)
 {
 	u32 cr1 = imx7_csi_reg_read(csi, CSI_CSICR1);
 
-	cr1 &= ~BIT_SOF_INTEN;
 	cr1 &= ~BIT_RFF_OR_INT;
 	cr1 &= ~BIT_FB1_DMA_DONE_INTEN;
 	cr1 &= ~BIT_FB2_DMA_DONE_INTEN;
-	cr1 &= ~BIT_EOF_INT_EN;
 
 	imx7_csi_reg_write(csi, cr1, CSI_CSICR1);
 }
@@ -322,17 +315,6 @@ static void imx7_csi_dmareq_rff_disable(struct imx7_csi *csi)
 	imx7_csi_reg_write(csi, cr3, CSI_CSICR3);
 }
 
-static void imx7_csi_sw_reset(struct imx7_csi *csi)
-{
-	imx7_csi_rx_fifo_clear(csi);
-
-	imx7_csi_dma_reflash(csi);
-
-	usleep_range(2000, 3000);
-
-	imx7_csi_irq_clear(csi);
-}
-
 static void imx7_csi_update_buf(struct imx7_csi *csi, dma_addr_t phys,
 				int buf_num)
 {
@@ -559,10 +541,18 @@ static void imx7_csi_deinit(struct imx7_csi *csi)
 
 static void imx7_csi_enable(struct imx7_csi *csi)
 {
-	imx7_csi_sw_reset(csi);
+	/* Clear the Rx FIFO and reflash the DMA controller. */
+	imx7_csi_rx_fifo_clear(csi);
+	imx7_csi_dma_reflash(csi);
 
-	imx7_csi_dmareq_rff_enable(csi);
+	usleep_range(2000, 3000);
+
+	/* Clear and enable the interrupts. */
+	imx7_csi_irq_clear(csi);
 	imx7_csi_hw_enable_irq(csi);
+
+	/* Enable the RxFIFO DMA and the CSI. */
+	imx7_csi_dmareq_rff_enable(csi);
 	imx7_csi_hw_enable(csi);
 }
 
-- 
Regards,

Laurent Pinchart