From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
The dsi controller includes access to the dphy which might be used
not only for dsi output but also for csi input on dsi1, so add the
necessary #phy-cells to allow it to be used as phy.
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
Tested-by: Sebastian Fricke <sebastian.fricke@xxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index edbbf35fe19e..5d2178cb3e38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1865,6 +1865,7 @@ mipi_dsi1: mipi@ff968000 {
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <0>;
+ #phy-cells = <0>;
status = "disabled";
ports {
--
2.29.2
