Hi Mauro,
Thanks for the patch.
On Mon, Feb 08, 2021 at 07:53:15AM +0100, Mauro Carvalho Chehab wrote:
> As described on its c file, the Maxim MAX9271 GMSL serializer isn't a
> self-contained driver, as MAX9271 is usually embedded in camera modules
> with at least one image sensor and optional additional components,
> such as uController units or ISPs/DSPs.
>
> After chanseset a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module"),
> there are now two drivers currently needing it: rdacm20 and rdacm21.
>
> Building with allmodconfig is now causing those warnings:
>
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_serial_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_configure_i2c' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_high_threshold' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_configure_gmsl_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_gpios' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_clear_gpios' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_enable_gpios' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_disable_gpios' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_verify_id' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_address' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_deserializer_address' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
> WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_translation' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko
>
> Address the issue by adding a Kconfig item for it, that it is
> seleced if either one of the modules that need max9271 is used.
>
> Reported-by: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
> Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module")
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 10 ++++++++++
> drivers/media/i2c/Makefile | 8 ++++----
> 2 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 2d3dc0d82f9e..a6802195d583 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -712,6 +712,16 @@ config VIDEO_ST_MIPID02
> module will be called st-mipid02.
> endmenu
>
> +#
> +# Camera ancillary chips
> +#
> +
> +# MAX9271 is usually embedded in camera modules
> +config VIDEO_MAX9271_SERIALIZER
> + tristate
> + default y
> + depends on VIDEO_RDACM20 || VIDEO_RDACM21
> +
I'd instead make the RDACM drivers depend on this one instead. The RDACM20
driver directly depends on the symbols in the MAX9271 driver.
> #
> # V4L2 I2C drivers that are related with Camera support
> #
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 6bd22d63e1a7..63bb16e51876 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -125,10 +125,10 @@ obj-$(CONFIG_VIDEO_IMX319) += imx319.o
> obj-$(CONFIG_VIDEO_IMX334) += imx334.o
> obj-$(CONFIG_VIDEO_IMX355) += imx355.o
> obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
> -rdacm20-camera_module-objs := rdacm20.o max9271.o
> -obj-$(CONFIG_VIDEO_RDACM20) += rdacm20-camera_module.o
> -rdacm21-camera_module-objs := rdacm21.o max9271.o
> -obj-$(CONFIG_VIDEO_RDACM21) += rdacm21-camera_module.o
> +obj-$(CONFIG_VIDEO_RDACM20) += rdacm20.o
> +obj-$(CONFIG_VIDEO_RDACM21) += rdacm21.o
> obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
>
> +obj-$(CONFIG_VIDEO_MAX9271_SERIALIZER) += max9271.o
> +
> obj-$(CONFIG_SDR_MAX2175) += max2175.o
--
Kind regards,
Sakari Ailus
