First some additional info.
my current dmesg is full with messages like:
[93953.934121] ds3000_readreg: read reg 0xfe, value 0x92
[93953.934128] ds3000_writereg: write reg 0xfe, value 0x9b
[93953.953980] ds3000_writereg: write reg 0x29, value 0x80
[93953.974481] ds3000_writereg: write reg 0x25, value 0x8a
[93953.991359] ds3000_writereg: write reg 0xc3, value 0x06
[93954.030037] ds3000_writereg: write reg 0xc8, value 0x0a
[93954.050038] ds3000_writereg: write reg 0xc4, value 0x05
[93954.070040] ds3000_writereg: write reg 0xc7, value 0x24
[93954.090041] ds3000_writereg: write reg 0x61, value 0xab
[93954.110048] ds3000_writereg: write reg 0x62, value 0x3a
[93954.130037] ds3000_writereg: write reg 0x56, value 0x00
[93954.150036] ds3000_writereg: write reg 0x76, value 0x00
[93954.170041] ds3000_writereg: write reg 0x00, value 0x00
[93954.212100] ds3000_writereg: write reg 0xb2, value 0x00
filename:
/lib/modules/2.6.33-020633-generic/kernel/drivers/media/dvb/frontends/ds3000.ko
license: GPL
author: Konstantin Dimitrov
description: DVB Frontend module for Montage Technology DS3000/TS2020
hardware
srcversion: 68E19175166A175DA0F8DA5
depends:
vermagic: 2.6.33-020633-generic SMP mod_unload modversions
parm: debug:Activates frontend debugging (default:0) (int)
filename:
/lib/modules/2.6.33-020633-generic/kernel/drivers/media/dvb/dvb-usb/teviis660.ko
license: GPL
version: 0.2
description: Driver for TEVII S660
author: Bob Liu
srcversion: 12CD426AC8F3EB7F840E7F8
alias: usb:v04B4pD660d*dc*dsc*dp*ic*isc*ip*
alias: usb:v9022pD660d*dc*dsc*dp*ic*isc*ip*
depends: dvb-usb
vermagic: 2.6.33-020633-generic SMP mod_unload modversions
parm: debug:set debugging level (1=info 2=xfer (or-able)). (int)
parm: adapter_nr:DVB adapter numbers (array of short)
after unloading and loading i get:
[94168.701559] dvb-usb: found a 'TEVII S660 DVBS2 USB2.0' in cold state,
will try to load a firmware
[94168.701576] usb 1-3: firmware: requesting dvb-usb-teviis660.fw
[94168.741456] dvb-usb: downloading firmware from file
'dvb-usb-teviis660.fw'
[94168.741473] usb 1-3: firmware: requesting dvb-usb-teviis660.fw
[94168.753227] teviis660: start downloading TEVIIS660 firmware
[94169.100046] dvb-usb: found a 'TEVII S660 DVBS2 USB2.0' in warm state.
[94169.100161] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[94169.100331] DVB: registering new adapter (TEVII S660 DVBS2 USB2.0)
[94169.229153] dvb-usb: MAC address: 00:18:bd:5c:54:7f
[94169.284778] ds3000_attach
[94169.300277] ds3000_readreg: read reg 0x00, value 0xe0
[94169.320273] ds3000_readreg: read reg 0x01, value 0xc0
[94169.340272] ds3000_readreg: read reg 0x02, value 0x00
[94169.340279] DS3000 chip version: 0.192 attached.
[94169.340285] S660: DS3000 attached.
[94169.340293] DVB: registering adapter 0 frontend 0 (Montage Technology
DS3000/TS2020)...
[94169.341773] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input6
[94169.341911] dvb-usb: schedule remote query interval to 150 msecs.
[94169.341925] dvb-usb: TEVII S660 DVBS2 USB2.0 successfully initialized
and connected.
[94169.342015] usbcore: registered new interface driver teviis660
this is the output from lsusb -v for the tevii device
Bus 001 Device 003: ID 9022:d660
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x9022
idProduct 0xd660
bcdDevice 0.00
iManufacturer 1 TBS-Tech
iProduct 2 DVBS2BOX
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Femon is giving me the following output:
FE: Montage Technology DS3000/TS2020 (DVBS)
Problem retrieving frontend information: Success
status SCVYL | signal 73% | snr 0% | ber 1590282272 | unc 1590282296
| FE_HAS_LOCK
Problem retrieving frontend information: Success
status SCVYL | signal 73% | snr 0% | ber 1590282272 | unc 1590282296
| FE_HAS_LOCK
Hope this helps a bit.
If any other info would be needed, i will try to collect that info.
With kind regards
William van de Velde
On 04/28/2010 04:47 PM, kc@xxxxxxxxxxxxxx wrote:
Hello all,
I have bought a new tevii s660 device in december 3 months later
(backorder) when i received my device i was having issues when loading the
driver from the tevii website.
First loading went ok but then i got hundreds of debug messages in dmesg.
Later this device really died so i sent it back for rma.
Now i have received a new device but still have the same issues.
I got the old drivers from Artem: Re: [vdr] System unresponsive and
picture breakup with VDR 1.7.10 and Tevii S660 (USB) (thanks for helping
out)
But still i have system freezes.
and a channel scan freaks out my system and device.
Does someone have time/ideas how to make this device work and how can i
deliver the right info to make it happen.
I'm no developer so programming is a problem but i'm happy to try patches
if someone can help me out.
So what info would be needed beside a dmesg/uname -a and how can i get the
right information
e.g. lsusb -vvv
With kind regards
William van de Velde
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
