On Thu, Dec 31, 2020 at 03:29:39PM +0100, Paul Kocialkowski wrote: > The A31 CSI controller supports two distinct input interfaces: > parallel and an external MIPI CSI-2 bridge. The parallel interface > is often connected to a set of hardware pins while the MIPI CSI-2 > bridge is an internal FIFO-ish link. As a result, these two inputs > are distinguished as two different ports. > > Note that only one of the two may be present on a controller instance. > For example, the V3s has one controller dedicated to MIPI-CSI2 and one > dedicated to parallel. > > Update the binding with an explicit ports node that holds two distinct > port nodes: one for parallel input and one for MIPI CSI-2. > > This is backward-compatible with the single-port approach that was > previously taken for representing the parallel interface port, which > stays enumerated as fwnode port 0. > > Note that additional ports may be added in the future, especially to > support feeding the CSI controller's output to the ISP. > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx> Maxime
