Hi Fabio, On 1/5/21 2:19 PM, Fabio Estevam wrote: > Hi Sébastien, > > On Tue, Jan 5, 2021 at 6:49 AM Sébastien Szymanski > <sebastien.szymanski@xxxxxxxxxxxx> wrote: > >> I used the following gstreamer pipeline to stream on the framebuffer: >> >> gst-launch-1.0 v4l2src device=/dev/video1 ! v4l2convert ! fbdevsink > > Thanks, this helps and now the pipeline starts and I do see the camera > image on the LCD. > > I switched to the same 5.4 you used just to make sure we are in the > same codebase. > > I am getting the wrong colors though. The captured image is too pinky. > > Do you get the correct colors on your test? Yes, the colors are correct on my test. Regards, > > Also, I had to describe like the polarities like this: > > hsync-active = <0>; > vsync-active = <1>; > pclk-sample = <0>; > > because if I used the same polarities from your patch, then the > pipeline does not start. > > Thanks for your help! > -- Sébastien Szymanski, Armadeus Systems Software engineer
