Hi Laurent,
On Mon, Jan 04, 2021 at 03:50:07PM +0200, Laurent Pinchart wrote:
> Hi Rui,
>
> On Mon, Jan 04, 2021 at 01:45:11PM +0000, Rui Miguel Silva wrote:
> > Hi, catching up with this thread.
> >
> > On Mon, Jan 04, 2021 at 03:08:58PM +0200, Laurent Pinchart wrote:
> > > On Mon, Jan 04, 2021 at 08:34:48AM -0300, Fabio Estevam wrote:
> > > > On Mon, Jan 4, 2021 at 3:05 AM Laurent Pinchart wrote:
> > > >
> > > > > That's not right, csi->is_csi2 is a flag that indicates if
> > > > > the current input to the CSI comes from the CSI-2 receiver.
> > > > >
> > > > > It looks like the i.MX6ULL is missing the MIPI CSI-2
> > > > > receiver and thus also the corresponding video mux. The
> > > > > WARN_ON() should thus indeed by bypassed, but only for
> > > > > devices that don't have the video mux. I wouldn't
> > > >
> > > > Unlike i.MX7, i.MX6UL/i.MX6ULL do not have a MIPI CSI-2 IP
> > > > block.
> > > >
> > > > They only have a parallel CSI interface, and no video mux is
> > > > present.
> > > >
> > > > So the csi->is_csi2 check I did seems correct, right?
> > >
> > > I don't think so. csi->is_csi2 tells if the currently selected
> > > input of the video mux is the CSI-2 receiver, not if there's a
> > > CSI-2 receiver present in the device. csi->is_csi2 should of
> > > course always be false when there's no CSI-2 receiver, but it
> > > can be false when a CSI-2 receiver is present and the currently
> > > selected input is the parallel input.
> >
> > Laurent is correct here. That flag indicates if CSI-2 is the
> > selected input for the video mux.
> >
> > > > > be surprised if other adaptations would be needed in the
> > > > > code.
> >
> > I really only had the warp7 board which only had the csi2 as video
> > mux input, never got the chance to test it with a parallel input.
> > And the driver expects that we always have a mux. I was not even
> > aware that an imx6 would have the same csi ip.
> >
> > but from the error outputs looks issues getting the format around
> > the imx7_csi_{try, get}_fmt.
>
> Do you still have the hardware, would you be able to test a patch
> series ?
Yeah, I have it somewhere... it could take a couple of days to
restore the setup, but possible for sure.
------
Cheers,
Rui
>
> > > > Yes, I found other paths that miss the csi->is_csi2 check too.
>
> -- Regards,
>
> Laurent Pinchart
