On Tue, 22 Dec 2020 17:04:06 +0100, Maxime Chevallier wrote: > The Techwell TW9900 is a video decoder supporting multiple input > standards, such as PAL, NTSC and SECAM, and outputs a BT.656 video > signal. > > It's designed to be low-power, posesses some features such as a > programmable comb-filter, and automatic input standard detection. > > Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx> > --- > V2->V3 : Fix the example not compiling due to a typo in the reset-gpios > node. > > .../devicetree/bindings/media/i2c/tw9900.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/tw9900.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/tw9900.example.dt.yaml: tw9900@44: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/tw9900.yaml See https://patchwork.ozlabs.org/patch/1419441 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
