Hi Michael
On Sun, 6 Dec 2020 at 17:29, <michael.srba@xxxxxxxxx> wrote:
>
> From: Michael Srba <Michael.Srba@xxxxxxxxx>
>
> This patch adds 1% tolerance on input clock, similar to other camera sensor
> drivers. It also allows for specifying the actual clock in the device tree,
> instead of relying on it being already set to the right frequency (which is
> often not the case).
>
> Signed-off-by: Michael Srba <Michael.Srba@xxxxxxxxx>
As the listed maintainer of this driver I'll say that I don't have any
objections to the aim of this patch.
Those who know the clock infrastructure far better than me are
recommending alternative methods of implementing this, so I'll leave
it up to them to give a Reviewed-by. When that's happened I'll add an
ack.
Dave
> ---
>
> changes since v1: default to exactly 24MHz when `clock-frequency` is not present
>
> ---
> drivers/media/i2c/imx219.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index f64c0ef7a897..b6500e2ab19e 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -1443,13 +1443,28 @@ static int imx219_probe(struct i2c_client *client)
> return PTR_ERR(imx219->xclk);
> }
>
> - imx219->xclk_freq = clk_get_rate(imx219->xclk);
> - if (imx219->xclk_freq != IMX219_XCLK_FREQ) {
> + ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", &imx219->xclk_freq);
> + if (ret) {
> + dev_warn(dev, "could not get xclk frequency\n");
> +
> + /* default to 24MHz */
> + imx219->xclk_freq = 24000000;
> + }
> +
> + /* this driver currently expects 24MHz; allow 1% tolerance */
> + if (imx219->xclk_freq < 23760000 || imx219->xclk_freq > 24240000) {
> dev_err(dev, "xclk frequency not supported: %d Hz\n",
> imx219->xclk_freq);
> return -EINVAL;
> }
>
> + ret = clk_set_rate(imx219->xclk, imx219->xclk_freq);
> + if (ret) {
> + dev_err(dev, "could not set xclk frequency\n");
> + return ret;
> + }
> +
> +
> ret = imx219_get_regulators(imx219);
> if (ret) {
> dev_err(dev, "failed to get regulators\n");
> --
> 2.29.2
>
