Hi all, I got a Mygica D689 which already have driver in v4l-dvb. But i can only get it work in VM (VMware player) but not in a real machine. Both using the same distribution/kernel/v4l-dvb etc. - Fedora 11 (32 bits) - Standard installation with the default kernel: 2.6.29.4-167.fc11.i686.PAE - with development tools/libraries installed download the latest v4l-dvb #hg clone http://www.linuxtv.org/hg/v4l-dvb #cd v4l-dvb #make - remove all the things in "/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/media" # make install plug the Mygica D689, message in real machine: Apr 18 09:23:06 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 3 Apr 18 09:23:06 localhost kernel: usb 1-7: New USB device found, idVendor=0572, idProduct=d811 Apr 18 09:23:06 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 18 09:23:06 localhost kernel: usb 1-7: Product: USB Stick Apr 18 09:23:06 localhost kernel: usb 1-7: Manufacturer: Geniatech Apr 18 09:23:06 localhost kernel: usb 1-7: SerialNumber: 080116 Apr 18 09:23:06 localhost kernel: usb 1-7: configuration #1 chosen from 1 choice Apr 18 09:23:06 localhost kernel: dvb-usb: found a 'Mygica D689 DMB-TH' in warm state. Apr 18 09:23:06 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 09:23:06 localhost kernel: DVB: registering new adapter (Mygica D689 DMB-TH) Apr 18 09:23:07 localhost kernel: DVB: registering adapter 0 frontend 0 (AltoBeam ATBM8830/8831 DMB-TH)... Apr 18 09:23:07 localhost kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/input/input6 Apr 18 09:23:07 localhost kernel: dvb-usb: schedule remote query interval to 100 msecs. Apr 18 09:23:07 localhost kernel: dvb-usb: Mygica D689 DMB-TH successfully initialized and connected. Apr 18 09:23:07 localhost kernel: usbcore: registered new interface driver dvb_usb_cxusb Apr 18 09:23:09 localhost kernel: dvb-usb: recv bulk message failed: -110 message in VM: Apr 18 09:51:51 f11vm kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 Apr 18 09:51:51 f11vm kernel: usb 1-1: New USB device found, idVendor=0572, idProduct=d811 Apr 18 09:51:51 f11vm kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 18 09:51:51 f11vm kernel: usb 1-1: Product: USB Stick Apr 18 09:51:51 f11vm kernel: usb 1-1: Manufacturer: Geniatech Apr 18 09:51:51 f11vm kernel: usb 1-1: SerialNumber: 080116 Apr 18 09:51:52 f11vm kernel: usb 1-1: configuration #1 chosen from 1 choice Apr 18 09:51:52 f11vm kernel: dvb-usb: found a 'Mygica D689 DMB-TH' in warm state. Apr 18 09:51:52 f11vm kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Apr 18 09:51:52 f11vm kernel: DVB: registering new adapter (Mygica D689 DMB-TH) Apr 18 09:51:53 f11vm kernel: DVB: registering adapter 0 frontend 0 (AltoBeam ATBM8830/8831 DMB-TH)... Apr 18 09:51:54 f11vm kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/input/input5 Apr 18 09:51:54 f11vm kernel: dvb-usb: schedule remote query interval to 100 msecs. Apr 18 09:51:54 f11vm kernel: dvb-usb: Mygica D689 DMB-TH successfully initialized and connected. Apr 18 09:51:54 f11vm kernel: usbcore: registered new interface driver dvb_usb_cxusb i can do w_scan with 11 services in VM but not ZERO in real machine!! Did the following log message imply sth!?!? Apr 18 09:23:09 localhost kernel: dvb-usb: recv bulk message failed: -110 I have tried to install in another real machine but also with the same result! Can anyone give me a hint on how to check/solve this issue!! Thanks, Halu Wong -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
