Hi, I recently upgraded my Myth box from Ubuntu 8.04 to 9.10 (runs 2.6.31-20-generic). Previously I used the drivers from http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/ however the card worked out of the box (once I got the later firmware) and so I presumed they had been merged. However one thing that wasn't working was the IR receiver so I checked out the latest v4l-dvb code and built it (after disabling the 1394 based ones as they broke the build) and then installed and rebooted and it detected the IR OK, ie Apr 13 14:40:05 mythtv kernel: [ 7.601716] input: i2c IR (FusionHDTV) as /devices/virtual/input/input6 Apr 13 14:40:05 mythtv kernel: [ 7.632093] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx23885[0]] And it works with lirc etc etc.. However I came to use it this morning and it now doesn't find it even if I load the module from where it was built.. [mythtv 15:13] ~/v4l-dvb >sudo rmmod ir_kbd_i2c [mythtv 15:13] ~/v4l-dvb >lsmod |grep ir_kbd_i2c [mythtv 15:13] ~/v4l-dvb >sudo insmod /home/myth/v4l-dvb/v4l/ir-kbd-i2c.ko I haven't delved much further yet (planning to printf my way through the probe routines) as I am a Linux kernel noob (plenty of FreeBSD experience though!). If any one has any suggestions or patches I'd be happy to try them out :) Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
Attachment:
signature.asc
Description: This is a digitally signed message part.