There's no need to allocate the hardware configuration struct separately.
Put it in struct ccs_sensor.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/ccs/ccs-core.c | 94 ++++++++++++++++---------------
drivers/media/i2c/ccs/ccs-quirk.c | 4 +-
drivers/media/i2c/ccs/ccs.h | 2 +-
3 files changed, 51 insertions(+), 49 deletions(-)
diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index af79d80ebb59..dcc71c8fe075 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -809,7 +809,7 @@ static int ccs_init_late_controls(struct ccs_sensor *sensor)
sensor->link_freq = v4l2_ctrl_new_int_menu(
&sensor->src->ctrl_handler, &ccs_ctrl_ops,
V4L2_CID_LINK_FREQ, __fls(*valid_link_freqs),
- __ffs(*valid_link_freqs), sensor->hwcfg->op_sys_clock);
+ __ffs(*valid_link_freqs), sensor->hwcfg.op_sys_clock);
return sensor->src->ctrl_handler.error;
}
@@ -922,8 +922,8 @@ static int ccs_get_mbus_formats(struct ccs_sensor *sensor)
pll->bits_per_pixel = f->compressed;
- for (j = 0; sensor->hwcfg->op_sys_clock[j]; j++) {
- pll->link_freq = sensor->hwcfg->op_sys_clock[j];
+ for (j = 0; sensor->hwcfg.op_sys_clock[j]; j++) {
+ pll->link_freq = sensor->hwcfg.op_sys_clock[j];
rval = ccs_pll_try(sensor, pll);
dev_dbg(&client->dev, "link freq %u Hz, bpp %u %s\n",
@@ -1123,21 +1123,21 @@ static int ccs_change_cci_addr(struct ccs_sensor *sensor)
int rval;
u32 val;
- client->addr = sensor->hwcfg->i2c_addr_dfl;
+ client->addr = sensor->hwcfg.i2c_addr_dfl;
rval = ccs_write(sensor, CCI_ADDRESS_CTRL,
- sensor->hwcfg->i2c_addr_alt << 1);
+ sensor->hwcfg.i2c_addr_alt << 1);
if (rval)
return rval;
- client->addr = sensor->hwcfg->i2c_addr_alt;
+ client->addr = sensor->hwcfg.i2c_addr_alt;
/* verify addr change went ok */
rval = ccs_read(sensor, CCI_ADDRESS_CTRL, &val);
if (rval)
return rval;
- if (val != sensor->hwcfg->i2c_addr_alt << 1)
+ if (val != sensor->hwcfg.i2c_addr_alt << 1)
return -ENODEV;
return 0;
@@ -1151,13 +1151,13 @@ static int ccs_change_cci_addr(struct ccs_sensor *sensor)
static int ccs_setup_flash_strobe(struct ccs_sensor *sensor)
{
struct ccs_flash_strobe_parms *strobe_setup;
- unsigned int ext_freq = sensor->hwcfg->ext_clk;
+ unsigned int ext_freq = sensor->hwcfg.ext_clk;
u32 tmp;
u32 strobe_adjustment;
u32 strobe_width_high_rs;
int rval;
- strobe_setup = sensor->hwcfg->strobe_setup;
+ strobe_setup = sensor->hwcfg.strobe_setup;
/*
* How to calculate registers related to strobe length. Please
@@ -1265,7 +1265,7 @@ static int ccs_setup_flash_strobe(struct ccs_sensor *sensor)
rval = ccs_write(sensor, FLASH_TRIGGER_RS, strobe_setup->trigger);
out:
- sensor->hwcfg->strobe_setup->trigger = 0;
+ sensor->hwcfg.strobe_setup->trigger = 0;
return rval;
}
@@ -1304,7 +1304,7 @@ static int ccs_power_on(struct device *dev)
gpiod_set_value(sensor->reset, 0);
gpiod_set_value(sensor->xshutdown, 1);
- sleep = SMIAPP_RESET_DELAY(sensor->hwcfg->ext_clk);
+ sleep = SMIAPP_RESET_DELAY(sensor->hwcfg.ext_clk);
usleep_range(sleep, sleep);
/*
@@ -1318,7 +1318,7 @@ static int ccs_power_on(struct device *dev)
* is found.
*/
- if (sensor->hwcfg->i2c_addr_alt) {
+ if (sensor->hwcfg.i2c_addr_alt) {
rval = ccs_change_cci_addr(sensor);
if (rval) {
dev_err(dev, "cci address change error\n");
@@ -1332,7 +1332,7 @@ static int ccs_power_on(struct device *dev)
goto out_cci_addr_fail;
}
- if (sensor->hwcfg->i2c_addr_alt) {
+ if (sensor->hwcfg.i2c_addr_alt) {
rval = ccs_change_cci_addr(sensor);
if (rval) {
dev_err(dev, "cci address change error\n");
@@ -1348,13 +1348,13 @@ static int ccs_power_on(struct device *dev)
}
rval = ccs_write(sensor, EXTCLK_FREQUENCY_MHZ,
- sensor->hwcfg->ext_clk / (1000000 / (1 << 8)));
+ sensor->hwcfg.ext_clk / (1000000 / (1 << 8)));
if (rval) {
dev_err(dev, "extclk frequency set failed\n");
goto out_cci_addr_fail;
}
- rval = ccs_write(sensor, CSI_LANE_MODE, sensor->hwcfg->lanes - 1);
+ rval = ccs_write(sensor, CSI_LANE_MODE, sensor->hwcfg.lanes - 1);
if (rval) {
dev_err(dev, "csi lane mode set failed\n");
goto out_cci_addr_fail;
@@ -1368,7 +1368,7 @@ static int ccs_power_on(struct device *dev)
}
rval = ccs_write(sensor, CSI_SIGNALING_MODE,
- sensor->hwcfg->csi_signalling_mode);
+ sensor->hwcfg.csi_signalling_mode);
if (rval) {
dev_err(dev, "csi signalling mode set failed\n");
goto out_cci_addr_fail;
@@ -1412,7 +1412,7 @@ static int ccs_power_off(struct device *dev)
* really see a power off and next time the cci address change
* will fail. So do a soft reset explicitly here.
*/
- if (sensor->hwcfg->i2c_addr_alt)
+ if (sensor->hwcfg.i2c_addr_alt)
ccs_write(sensor, SOFTWARE_RESET, CCS_SOFTWARE_RESET_ON);
gpiod_set_value(sensor->reset, 1);
@@ -1551,8 +1551,8 @@ static int ccs_start_streaming(struct ccs_sensor *sensor)
if (CCS_LIM(sensor, FLASH_MODE_CAPABILITY) &
(CCS_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE) &&
- sensor->hwcfg->strobe_setup != NULL &&
- sensor->hwcfg->strobe_setup->trigger != 0) {
+ sensor->hwcfg.strobe_setup != NULL &&
+ sensor->hwcfg.strobe_setup->trigger != 0) {
rval = ccs_setup_flash_strobe(sensor);
if (rval)
goto out;
@@ -2850,9 +2850,9 @@ static int __maybe_unused ccs_resume(struct device *dev)
return rval;
}
-static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
+static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
{
- struct ccs_hwconfig *hwcfg;
+ struct ccs_hwconfig *hwcfg = &sensor->hwcfg;
struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
struct fwnode_handle *ep;
struct fwnode_handle *fwnode = dev_fwnode(dev);
@@ -2862,7 +2862,7 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
- return NULL;
+ return -ENODEV;
bus_cfg.bus_type = V4L2_MBUS_CSI2_DPHY;
rval = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
@@ -2874,10 +2874,6 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
if (rval)
goto out_err;
- hwcfg = devm_kzalloc(dev, sizeof(*hwcfg), GFP_KERNEL);
- if (!hwcfg)
- goto out_err;
-
switch (bus_cfg.bus_type) {
case V4L2_MBUS_CSI2_DPHY:
hwcfg->csi_signalling_mode = CCS_CSI_SIGNALING_MODE_CSI_2_DPHY;
@@ -2891,6 +2887,7 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
break;
default:
dev_err(dev, "unsupported bus %u\n", bus_cfg.bus_type);
+ rval = -EINVAL;
goto out_err;
}
@@ -2907,6 +2904,7 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
break;
default:
dev_err(dev, "invalid rotation %u\n", rotation);
+ rval = -EINVAL;
goto out_err;
}
}
@@ -2921,14 +2919,17 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
if (!bus_cfg.nr_of_link_frequencies) {
dev_warn(dev, "no link frequencies defined\n");
+ rval = -EINVAL;
goto out_err;
}
hwcfg->op_sys_clock = devm_kcalloc(
dev, bus_cfg.nr_of_link_frequencies + 1 /* guardian */,
sizeof(*hwcfg->op_sys_clock), GFP_KERNEL);
- if (!hwcfg->op_sys_clock)
+ if (!hwcfg->op_sys_clock) {
+ rval = -ENOMEM;
goto out_err;
+ }
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) {
hwcfg->op_sys_clock[i] = bus_cfg.link_frequencies[i];
@@ -2937,29 +2938,30 @@ static struct ccs_hwconfig *ccs_get_hwconfig(struct device *dev)
v4l2_fwnode_endpoint_free(&bus_cfg);
fwnode_handle_put(ep);
- return hwcfg;
+
+ return 0;
out_err:
v4l2_fwnode_endpoint_free(&bus_cfg);
fwnode_handle_put(ep);
- return NULL;
+
+ return rval;
}
static int ccs_probe(struct i2c_client *client)
{
struct ccs_sensor *sensor;
- struct ccs_hwconfig *hwcfg = ccs_get_hwconfig(&client->dev);
unsigned int i;
int rval;
- if (hwcfg == NULL)
- return -ENODEV;
-
sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
if (sensor == NULL)
return -ENOMEM;
- sensor->hwcfg = hwcfg;
+ rval = ccs_get_hwconfig(sensor, &client->dev);
+ if (rval)
+ return rval;
+
sensor->src = &sensor->ssds[sensor->ssds_used];
v4l2_i2c_subdev_init(&sensor->src->sd, client, &ccs_ops);
@@ -2982,33 +2984,33 @@ static int ccs_probe(struct i2c_client *client)
}
if (sensor->ext_clk) {
- if (sensor->hwcfg->ext_clk) {
+ if (sensor->hwcfg.ext_clk) {
unsigned long rate;
rval = clk_set_rate(sensor->ext_clk,
- sensor->hwcfg->ext_clk);
+ sensor->hwcfg.ext_clk);
if (rval < 0) {
dev_err(&client->dev,
"unable to set clock freq to %u\n",
- sensor->hwcfg->ext_clk);
+ sensor->hwcfg.ext_clk);
return rval;
}
rate = clk_get_rate(sensor->ext_clk);
- if (rate != sensor->hwcfg->ext_clk) {
+ if (rate != sensor->hwcfg.ext_clk) {
dev_err(&client->dev,
"can't set clock freq, asked for %u but got %lu\n",
- sensor->hwcfg->ext_clk, rate);
+ sensor->hwcfg.ext_clk, rate);
return rval;
}
} else {
- sensor->hwcfg->ext_clk = clk_get_rate(sensor->ext_clk);
+ sensor->hwcfg.ext_clk = clk_get_rate(sensor->ext_clk);
dev_dbg(&client->dev, "obtained clock freq %u\n",
- sensor->hwcfg->ext_clk);
+ sensor->hwcfg.ext_clk);
}
- } else if (sensor->hwcfg->ext_clk) {
+ } else if (sensor->hwcfg.ext_clk) {
dev_dbg(&client->dev, "assuming clock freq %u\n",
- sensor->hwcfg->ext_clk);
+ sensor->hwcfg.ext_clk);
} else {
dev_err(&client->dev, "unable to obtain clock freq\n");
return -EINVAL;
@@ -3061,7 +3063,7 @@ static int ccs_probe(struct i2c_client *client)
*
* Rotation also changes the bayer pattern.
*/
- if (sensor->hwcfg->module_board_orient ==
+ if (sensor->hwcfg.module_board_orient ==
CCS_MODULE_BOARD_ORIENT_180)
sensor->hvflip_inv_mask =
CCS_IMAGE_ORIENTATION_HORIZONTAL_MIRROR |
@@ -3133,8 +3135,8 @@ static int ccs_probe(struct i2c_client *client)
/* prepare PLL configuration input values */
sensor->pll.bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
- sensor->pll.csi2.lanes = sensor->hwcfg->lanes;
- sensor->pll.ext_clk_freq_hz = sensor->hwcfg->ext_clk;
+ sensor->pll.csi2.lanes = sensor->hwcfg.lanes;
+ sensor->pll.ext_clk_freq_hz = sensor->hwcfg.ext_clk;
sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN);
ccs_create_subdev(sensor, sensor->scaler, " scaler", 2,
diff --git a/drivers/media/i2c/ccs/ccs-quirk.c b/drivers/media/i2c/ccs/ccs-quirk.c
index 5a24da1d7aa9..facec28f8447 100644
--- a/drivers/media/i2c/ccs/ccs-quirk.c
+++ b/drivers/media/i2c/ccs/ccs-quirk.c
@@ -152,13 +152,13 @@ static int jt8ev1_post_poweron(struct ccs_sensor *sensor)
if (rval < 0)
return rval;
- switch (sensor->hwcfg->ext_clk) {
+ switch (sensor->hwcfg.ext_clk) {
case 9600000:
return ccs_write_addr_8s(sensor, regs_96,
ARRAY_SIZE(regs_96));
default:
dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
- sensor->hwcfg->ext_clk);
+ sensor->hwcfg.ext_clk);
return 0;
}
}
diff --git a/drivers/media/i2c/ccs/ccs.h b/drivers/media/i2c/ccs/ccs.h
index bfe39e02f5e9..2d1e8339f663 100644
--- a/drivers/media/i2c/ccs/ccs.h
+++ b/drivers/media/i2c/ccs/ccs.h
@@ -215,7 +215,7 @@ struct ccs_sensor {
struct ccs_subdev *binner;
struct ccs_subdev *scaler;
struct ccs_subdev *pixel_array;
- struct ccs_hwconfig *hwcfg;
+ struct ccs_hwconfig hwcfg;
struct regulator *vana;
struct clk *ext_clk;
struct gpio_desc *xshutdown;
--
2.27.0
