Re: [PATCH v2 09/19] ARM: dts: sunxi: h3/h5: Add CSI controller port for parallel input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Nov 28, 2020 at 03:28:29PM +0100, Paul Kocialkowski wrote:
> Since the CSI controller binding is getting a bit more complex due
> to the addition of MIPI CSI-2 bridge support, make the ports node
> explicit with the parallel port.
> 
> This way, it's clear that the controller only supports parallel
> interface input and there's no confusion about the port number.
> 
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 9be13378d4df..02b698cace6a 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -803,6 +803,15 @@ csi: camera@1cb0000 {
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&csi_pins>;
>  			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				csi_in_parallel: port@0 {
> +					reg = <0>;
> +				};
> +			};
>  		};

This will create a DTC warning, since port@0 is the only node, and is
equivalent to port

Maxime

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux