Re: [PATCH] media: gp8psk: initialize stats at power control logic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Derek,

Em Mon, 30 Nov 2020 08:04:31 -0800
VDRU VDRU <user.vdr@xxxxxxxxx> escreveu:

> I have hardware that uses this driver and can conduct a test if it
> will help resolve any confusion/assumption. I'd also like to suggest
> that making changes to drivers with no means of testing those changes
> is bad. This has happened in the past and resulted in unnecessarily
> breaking drivers for those who use it. No patch should be merged
> without testing!

It helps a lot if you could test it.

The current situation is that, if the I2C read fails, the
driver will randomly power up only partially, which could
cause issues.

The original proposed approach:

	https://lore.kernel.org/linux-media/20190627222020.45909-1-willemdebruijn.kernel@xxxxxxxxx/

Will just give up trying to powering it up, while the
patch I'm proposing will force the device to power up
all parts of it. So, it seems safer than the original
one.

Please test with the enclosed patch. It is basically
the same as the one I proposed, although this one will
print a message at dlog, due to this:

	pr_info("ret returned %d\n", ret);

This could happen when the device got plugged and/or if
you put the machine into suspend mode, when resuming it
while streaming[1]

Regards,
Mauro

[1] not sure if dvb-usb supports it. One of the rationales
behind dvb-usb-v2 were to be able of properly do
suspend/resumes.



diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index c07f46f5176e..be55496cc717 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -182,11 +182,16 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
 
 static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
-	u8 status, buf;
+	u8 status = 0, buf;
+	int ret;
 	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
 
 	if (onoff) {
-		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+		ret = gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+		// Just to check if the condition happens in practice
+		if (ret < 0)
+			pr_info("ret returned %d\n", ret);
+
 		if (! (status & bm8pskStarted)) {  /* started */
 			if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
 				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux