Hi Sakari, On Fri 27 Nov 20, 15:52, Sakari Ailus wrote: > Hi Paul, > > On Fri, Nov 13, 2020 at 06:03:42PM +0100, Paul Kocialkowski wrote: > > This introduces YAML bindings documentation for the OV8865 > > image sensor. > > > > Co-developed-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx> > > Signed-off-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx> > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> > > --- > > .../bindings/media/i2c/ovti,ov8865.yaml | 120 ++++++++++++++++++ > > 1 file changed, 120 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml > > new file mode 100644 > > index 000000000000..47af90d6ebea > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml > > @@ -0,0 +1,120 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: OmniVision OV8865 Image Sensor Device Tree Bindings > > + > > +maintainers: > > + - Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> > > + > > +properties: > > + compatible: > > + const: ovti,ov8865 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: EXTCLK Clock > > + > > + assigned-clocks: > > + maxItems: 1 > > + > > + assigned-clock-rates: > > + maxItems: 1 > > + > > + dvdd-supply: > > + description: Digital Domain Power Supply > > + > > + avdd-supply: > > + description: Analog Domain Power Supply (internal AVDD is used if missing) > > + > > + dovdd-supply: > > + description: I/O Domain Power Supply > > + > > + powerdown-gpios: > > + maxItems: 1 > > + description: Power Down Pin GPIO Control (active low) > > + > > + reset-gpios: > > + maxItems: 1 > > + description: Reset Pin GPIO Control (active low) > > + > > + port: > > + type: object > > + description: MIPI CSI-2 transmitter port > > + > > + properties: > > + endpoint: > > + type: object > > + > > + properties: > > + remote-endpoint: true > > + > > + data-lanes: > > + minItems: 1 > > + maxItems: 4 > > + > > + required: > > + - bus-type > > + - data-lanes > > + - remote-endpoint > > link-frequencies seems to be still missing here (same with the example). Oh my bad, you're right. Note that I found an issue in this series (as well as the ov5648 one) so I will be reposting them anyways (likely later today). Cheers, Paul -- Paul Kocialkowski, Bootlin Embedded Linux and kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
