[PATCH for v5.10 1/2] pulse8-cec: fix duplicate free at disconnect or probe error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit 601282d65b96b ("media: pulse8-cec: use adap_free callback") used
the adap_free callback to clean up on disconnect. What I forgot was that
in the probe it will call cec_delete_adapter() followed by kfree(pulse8)
if an error occurs. But by using the adap_free callback,
cec_delete_adapter() is already freeing the pulse8 struct.

This wasn't noticed since normally the probe works fine, but Pulse-Eight
published a new firmware version that caused a probe error, so now it
hits this bug. This affects firmware version 12, but probably any
version >= 10.

Commit aa9eda76129ca ("media: pulse8-cec: close serio in disconnect, not
adap_free") made this worse by adding the line 'pulse8->serio = NULL'
right after the call to cec_unregister_adapter in the disconnect()
function. Unfortunately, cec_unregister_adapter will typically call
cec_delete_adapter (unless a filehandle to the cec device is still
open), which frees the pulse8 struct. So now it will also crash on a
simple unplug of the Pulse-Eight device.

With this fix both the unplug issue and a probe() error situation are
handled correctly again.

It will still fail to probe() with a v12 firmware, that's something
to look at separately.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Reported-by: Maxime Ripard <maxime@xxxxxxxxxx>
Fixes: aa9eda76129ca ("media: pulse8-cec: close serio in disconnect, not adap_free")
Fixes: 601282d65b96b ("media: pulse8-cec: use adap_free callback")
---
 drivers/media/cec/usb/pulse8/pulse8-cec.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/media/cec/usb/pulse8/pulse8-cec.c b/drivers/media/cec/usb/pulse8/pulse8-cec.c
index e4d8446b87da..5d3a3f775bc8 100644
--- a/drivers/media/cec/usb/pulse8/pulse8-cec.c
+++ b/drivers/media/cec/usb/pulse8/pulse8-cec.c
@@ -650,7 +650,6 @@ static void pulse8_disconnect(struct serio *serio)
 	struct pulse8 *pulse8 = serio_get_drvdata(serio);
 
 	cec_unregister_adapter(pulse8->adap);
-	pulse8->serio = NULL;
 	serio_set_drvdata(serio, NULL);
 	serio_close(serio);
 }
@@ -830,8 +829,10 @@ static int pulse8_connect(struct serio *serio, struct serio_driver *drv)
 	pulse8->adap = cec_allocate_adapter(&pulse8_cec_adap_ops, pulse8,
 					    dev_name(&serio->dev), caps, 1);
 	err = PTR_ERR_OR_ZERO(pulse8->adap);
-	if (err < 0)
-		goto free_device;
+	if (err < 0) {
+		kfree(pulse8);
+		return err;
+	}
 
 	pulse8->dev = &serio->dev;
 	serio_set_drvdata(serio, pulse8);
@@ -874,8 +875,6 @@ static int pulse8_connect(struct serio *serio, struct serio_driver *drv)
 	serio_close(serio);
 delete_adap:
 	cec_delete_adapter(pulse8->adap);
-free_device:
-	kfree(pulse8);
 	return err;
 }
 
-- 
2.29.2




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux