Hi AngeloGioacchino,
On 29.10.2020 20:29, kholk11@xxxxxxxxx wrote:
From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
Add YAML device tree binding for IMX300 CMOS image sensor, and
the relevant MAINTAINERS entries.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
---
.../bindings/media/i2c/sony,imx300.yaml | 112 ++++++++++++++++++
MAINTAINERS | 7 ++
2 files changed, 119 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
new file mode 100644
index 000000000000..8f1d795f8072
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.3-Inch 8Mpixel Stacked CMOS Digital Image Sensor
You said this is an 8 MP sensor,
+
+maintainers:
+ - AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
+
+description: |-
+ The Sony IMX300 is a 1/2.3-inch Stacked CMOS (Exmor-RS) digital image
+ sensor with a pixel size of 1.08um and an active array size of
+ 5948H x 4140V. It is programmable through I2C interface at address 0x10.
- but 5948H x 4140V is more than 8 MP.
Thanks,
Andrey
+ Image data is sent through MIPI CSI-2, which is configured as either 2 or
+ 4 data lanes.
+
+properties:
+ compatible:
+ const: sony,imx300
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ vdig-supply:
+ description:
+ Digital I/O voltage supply, 1.15-1.20 volts
+
+ vana-supply:
+ description:
+ Analog voltage supply, 2.2 volts
+
+ vddl-supply:
+ description:
+ Digital core voltage supply, 1.8 volts
+
+ reset-gpios:
+ description: |-
+ Reference to the GPIO connected to the xclr pin, if any.
+ Must be released (set high) after all supplies are applied.
+
+ # See ../video-interfaces.txt for more details
+ port:
+ type: object
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ data-lanes:
+ description: |-
+ The sensor supports either two-lane, or four-lane operation,
+ but the driver currently supports only four-lane.
+ items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
+ clock-noncontinuous: true
+
+ link-frequencies:
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies. The driver currently needs
+ to switch between 780000000 and 480000000 Hz in order to
+ guarantee functionality of all modes.
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - vana-supply
+ - vdig-supply
+ - vddl-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx300: sensor@10 {
+ compatible = "sony,imx300";
+ reg = <0x10>;
+ clocks = <&imx300_xclk>;
+ vana-supply = <&imx300_vana>; /* 2.2v */
+ vdig-supply = <&imx300_vdig>; /* 1.2v */
+ vddl-supply = <&imx300_vddl>; /* 1.8v */
+
+ port {
+ imx300_0: endpoint {
+ remote-endpoint = <&csi1_ep>;
+ data-lanes = <0 1 2 3>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <780000000 480000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index c66710dd7e0a..21ba41db0063 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16279,6 +16279,13 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/imx290.txt
F: drivers/media/i2c/imx290.c
+SONY IMX300 SENSOR DRIVER
+M: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/sony,imx300.yaml
+F: drivers/media/i2c/imx300.c
+
SONY IMX319 SENSOR DRIVER
M: Bingbu Cao <bingbu.cao@xxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
