The Bayer GRBG10 mode used for earlier modes 3280x2460 and 1640x1232 isn't the mode output by the sensor for the 3264x2448 and 1632x1224 modes. Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10 for 3264x2448 & 1632x1224 modes. Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx> --- This patch is sent out after Dongchun Zhu clarified the Bayer modes used by different sensor configuration in the below thread. https://lkml.org/lkml/2020/11/24/335 drivers/media/i2c/ov8856.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c index 2f4ceaa80593..a2dcbece558c 100644 --- a/drivers/media/i2c/ov8856.c +++ b/drivers/media/i2c/ov8856.c @@ -1281,8 +1281,13 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode, { fmt->width = mode->width; fmt->height = mode->height; - fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; fmt->field = V4L2_FIELD_NONE; + + if (mode->reg_list.regs == mode_3264x2448_regs || + mode->reg_list.regs == mode_1632x1224_regs) + fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; + else + fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; } static int ov8856_start_streaming(struct ov8856 *ov8856) -- 2.27.0
