Andy Walls wrote:
> On Tue, 2010-04-06 at 15:18 -0300, Mauro Carvalho Chehab wrote:
>> The original Remote Controller approach were very messy: a big file,
>> that were part of ir-common kernel module, containing 64 different
>> RC keymap tables, used by the V4L/DVB drivers.
>>
>> Better to break each RC keymap table into a separate module,
>> registering them into rc core on a process similar to the fs/nls tables.
>>
>> As an userspace program is now in charge of loading those tables,
>> adds an option to allow the complete removal of those tables from
>> kernelspace.
>>
>> Yet, on embedded devices like Set Top Boxes and TV sets, maybe the
>> only available input device is the IR. So, we should keep allowing
>> the usage of in-kernel tables, but a latter patch should change
>> the default to 'n', after giving some time for distros to add
>> the v4l-utils with the ir-keytable program, to allow the table
>> load via userspace.
>
> I know I'm probably late on commenting on this.
>
> Although this is interesting, it seems like overkill.
>
>
> 1. How will this help move us to the "just works" case, if now userspace
> has to help the kernel. Every distro is likely just going to bundle a
> script which loads them all into the kernel and forgets about them.
No. They will either use userspace or kernelspace keymaps. For in-kernel
keymaps, there's nothing needed on userspace.
> 2. How is a driver, which knows the bundled remote, supposed to convey
> to userspace "load this map by default for my IR receiver"? Is that
> covered in another portion of the patch?
It is on a separate patch. Basically, by the name. The table name is stored
on each IR map entry on kernel. If the table is in kernel, the table will
be dynamically loaded, when needed.
Userspace can always replace it by another one.
For example, this is my current test setup:
$ ./ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event8) with:
Driver "saa7134", raw software decoder, table "rc-avermedia-m135a-rm-jx"
Supported protocols: NEC RC-5 RC-6
Found /sys/class/rc/rc1/ (/dev/input/event9) with:
Driver "cx88xx", hardware decoder, table "rc-pixelview-mk12"
Supported protocols: other
Current protocols: NEC
Found /sys/class/rc/rc2/ (/dev/input/event10) with:
Driver "em28xx", hardware decoder, table "rc-rc5-hauppauge-new"
Supported protocols: NEC RC-5
Current protocols: RC-5
When ready, ir-keytable udev option will get driver and table info and
seek on some files for the proper keymap, if the user wants to replace it
by a customized one, or if the kernel keymap is disabled.
>
> 3. If you're going to be so remote specific, why not add protocol
> information in these regarding the remotes? You can tell the core
> everything to expect from this remote: raw vs. hardware decoder and the
> RC-5/NEC/RC-6/JVC/whatever raw protocol decoder to use. That gets us
> closer to "just works" and avoids false input events from two of the raw
> deoders both thinking they got a valid code.
The table contains the info.
> 4. /sbin/lsmod is now going to give a very long listing with lots of
> noise. When these things are registered with the core, is the module's
> use count incremented when the core knows a driver is using one of them?
No. It will just show the used modules, as they're dynamically loaded.
For example, with my 3 test device driver loaded, it shows:
rc_rc5_hauppauge_new 1100 0
rc_pixelview_mk12 953 0
rc_avermedia_m135a_rm_jx 1016 0
>
> 5. Each module is going to consume a page of vmalloc address space and
> ram, and an addtional page of vmalloc address as a gap behind it. These
> maps are rather small in comparison. Is it really worth all the page
> table entries to load all these as individual modules? Memory is cheap,
> and small allocations can fill in fragmentation gaps in the vmalloc
> address space, but page table entries are spent on better things.
My plan is to merge several keymaps. I'm currently trying to obtain some
RC's to write the correct keymaps and try to merge them.
> I guess I'm not aware of what the return is here for the costs.
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
