On 11/20/20 7:15 PM, Jacopo Mondi wrote:
> Fix GPIO enable/disable operations which wrongly read the 0x0f register
> to obtain the current mask of the enabled lines instead of using
> the correct 0x0e register.
>
> Also fix access to bit 0 of the register which is marked as reserved.
>
> Fixes: 34009bffc1c6 ("media: i2c: Add RDACM20 driver")
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> ---
> drivers/media/i2c/max9271.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
> index 0f6f7a092a46..c247db569bab 100644
> --- a/drivers/media/i2c/max9271.c
> +++ b/drivers/media/i2c/max9271.c
> @@ -223,12 +223,12 @@ int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
> {
> int ret;
>
> - ret = max9271_read(dev, 0x0f);
> + ret = max9271_read(dev, 0x0e);
> if (ret < 0)
> return 0;
>
> /* BIT(0) reserved: GPO is always enabled. */
> - ret |= gpio_mask | BIT(0);
> + ret |= (gpio_mask & ~BIT(0));
() hardly needed here, = and <op>= have very low prio...
[...]
MBR, Sergei
