On Fri, 2010-04-09 at 17:55 -0400, Devin Heitmueller wrote: > On Fri, Apr 9, 2010 at 9:01 AM, Mauro Carvalho Chehab > <mchehab@xxxxxxxxxx> wrote: > > [1] Basically, a keycode (like KEY_POWER) could be used to wake up the machine. So, by > > associating some scancode to KEY_POWER via ir-core, the driver can program the hardware > > to wake up the machine with the corresponding scancode. I can't see a need for a change at > > ir-core to implement such behavior. Of course, some attributes at sysfs can be added > > to enable or disable this feature, and to control the associated logic, but we first > > need to implement the wakeup feature at the hardware driver, and then adding some logic > > at ir-core to add the non-hardware specific code there. > > Really? Have you actually seen any hardware where a particular scan > code can be used to wake up the hardware? The only hardware I have > seen has the ability to unsuspend on arrival of IR traffic, but you > didn't have the granularity to dictate that it only wake up on > particular scancodes. The CX23888 and CX23102 can do it. Basically any IR pulse pattern your heart desires; within reason. And any carrier freq you want too; within reason. But let's be real, the cx23885, cx231xx, and cx25840 modules are nowhere near properly supporing suspend/resume for their main video and DMA functions, AFAIK. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
