[PATCH v4 22/30] media: ov5647: Support V4L2_CID_HBLANK control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for the V4L2_CID_HBLANK read-only control.

The implementation has been upported from RaspberryPi BSP commit:
commit d82f202156605 ("media: i2c: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag")

Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
 drivers/media/i2c/ov5647.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 86612f941e891..2ffca9f658bfa 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -77,6 +77,7 @@ struct ov5647_mode {
 	struct v4l2_mbus_framefmt	format;
 	struct v4l2_rect		crop;
 	u64				pixel_rate;
+	int				hts;
 	const struct regval_list	*reg_list;
 	unsigned int			num_regs;
 };
@@ -98,6 +99,7 @@ struct ov5647 {
 	struct v4l2_ctrl_handler	ctrls;
 	const struct ov5647_mode	*mode;
 	struct v4l2_ctrl		*pixel_rate;
+	struct v4l2_ctrl		*hblank;
 };
 
 static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd)
@@ -585,6 +587,7 @@ static const struct ov5647_mode ov5647_8bpp_modes[] = {
 			.height		= 960,
 		},
 		.pixel_rate	= 77291670,
+		.hts		= 1896,
 		.reg_list	= ov5647_640x480_8bpp,
 		.num_regs	= ARRAY_SIZE(ov5647_640x480_8bpp)
 	},
@@ -607,6 +610,7 @@ static const struct ov5647_mode ov5647_10bpp_modes[] = {
 			.height		= 1944
 		},
 		.pixel_rate	= 87500000,
+		.hts		= 2844,
 		.reg_list	= ov5647_2592x1944_10bpp,
 		.num_regs	= ARRAY_SIZE(ov5647_2592x1944_10bpp)
 	},
@@ -626,6 +630,7 @@ static const struct ov5647_mode ov5647_10bpp_modes[] = {
 			.height		= 1080,
 		},
 		.pixel_rate	= 81666700,
+		.hts		= 2416,
 		.reg_list	= ov5647_1080p30_10bpp,
 		.num_regs	= ARRAY_SIZE(ov5647_1080p30_10bpp)
 	},
@@ -645,6 +650,7 @@ static const struct ov5647_mode ov5647_10bpp_modes[] = {
 			.height		= 1944,
 		},
 		.pixel_rate	= 81666700,
+		.hts		= 1896,
 		.reg_list	= ov5647_2x2binned_10bpp,
 		.num_regs	= ARRAY_SIZE(ov5647_2x2binned_10bpp)
 	},
@@ -664,6 +670,7 @@ static const struct ov5647_mode ov5647_10bpp_modes[] = {
 			.height		= 1920,
 		},
 		.pixel_rate	= 55000000,
+		.hts		= 1852,
 		.reg_list	= ov5647_640x480_10bpp,
 		.num_regs	= ARRAY_SIZE(ov5647_640x480_10bpp)
 	},
@@ -1090,9 +1097,15 @@ static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
 	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
 		*v4l2_subdev_get_try_format(sd, cfg, format->pad) = mode->format;
 	} else {
+		int hblank;
+
 		sensor->mode = mode;
 		__v4l2_ctrl_modify_range(sensor->pixel_rate, mode->pixel_rate,
 					 mode->pixel_rate, 1, mode->pixel_rate);
+
+		hblank = mode->hts - mode->format.width;
+		__v4l2_ctrl_modify_range(sensor->hblank, hblank, hblank, 1,
+					 hblank);
 	}
 	*fmt = mode->format;
 	mutex_unlock(&sensor->lock);
@@ -1301,6 +1314,9 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_PIXEL_RATE:
 		/* Read-only, but we adjust it based on mode. */
 		return 0;
+	case V4L2_CID_HBLANK:
+		/* Read-only, but we adjust it based on mode. */
+		return 0;
 	default:
 		dev_info(&client->dev,
 			 "Control (id:0x%x, val:0x%x) not supported\n",
@@ -1318,8 +1334,9 @@ static const struct v4l2_ctrl_ops ov5647_ctrl_ops = {
 static int ov5647_init_controls(struct ov5647 *sensor)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
+	int hblank;
 
-	v4l2_ctrl_handler_init(&sensor->ctrls, 6);
+	v4l2_ctrl_handler_init(&sensor->ctrls, 7);
 
 	v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 			  V4L2_CID_AUTOGAIN, 0, 1, 1, 0);
@@ -1345,10 +1362,18 @@ static int ov5647_init_controls(struct ov5647 *sensor)
 					       sensor->mode->pixel_rate,
 					       sensor->mode->pixel_rate, 1,
 					       sensor->mode->pixel_rate);
+
+	/* By default, HBLANK is read only, but it does change per mode. */
+	hblank = sensor->mode->hts - sensor->mode->format.width;
+	sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
+					   V4L2_CID_HBLANK, hblank, hblank, 1,
+					   hblank);
+
 	if (sensor->ctrls.error)
 		goto handler_free;
 
 	sensor->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+	sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 	sensor->sd.ctrl_handler = &sensor->ctrls;
 
 	return 0;
-- 
2.29.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux