On Mon, Nov 02, 2020 at 05:08:47PM +0200, Sakari Ailus wrote:
> Hi Krysztof,
>
> On Mon, Oct 19, 2020 at 07:26:17PM +0200, Krzysztof Kozlowski wrote:
> > The IMX258 sensor driver checked in device properties for a
> > clock-frequency property which actually does not mean that the clock is
> > really running such frequency or is it even enabled.
> >
> > Get the provided clock and check it frequency. If none is provided,
> > fall back to old property.
> >
> > Enable the clock when accessing the IMX258 registers and when streaming
> > starts with runtime PM.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> >
> > ---
> >
> > Changes since v4:
> > 1. Add missing imx258_power_off.
> >
> > Changes since v3:
> > 1. None
> >
> > Changes since v2:
> > 1. Do not try to set drvdata, wrap lines.
> > 2. Use dev_dbg.
> >
> > Changes since v1:
> > 1. Use runtime PM for clock toggling
> > ---
> > drivers/media/i2c/imx258.c | 73 +++++++++++++++++++++++++++++++++-----
> > 1 file changed, 64 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
> > index ae183b0dbba9..038115471f17 100644
> > --- a/drivers/media/i2c/imx258.c
> > +++ b/drivers/media/i2c/imx258.c
> > @@ -2,6 +2,7 @@
> > // Copyright (C) 2018 Intel Corporation
> >
> > #include <linux/acpi.h>
> > +#include <linux/clk.h>
> > #include <linux/delay.h>
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > @@ -68,6 +69,9 @@
> > #define REG_CONFIG_MIRROR_FLIP 0x03
> > #define REG_CONFIG_FLIP_TEST_PATTERN 0x02
> >
> > +/* Input clock frequency in Hz */
> > +#define IMX258_INPUT_CLOCK_FREQ 19200000
> > +
> > struct imx258_reg {
> > u16 address;
> > u8 val;
> > @@ -610,6 +614,8 @@ struct imx258 {
> >
> > /* Streaming on/off */
> > bool streaming;
> > +
> > + struct clk *clk;
> > };
> >
> > static inline struct imx258 *to_imx258(struct v4l2_subdev *_sd)
> > @@ -972,6 +978,29 @@ static int imx258_stop_streaming(struct imx258 *imx258)
> > return 0;
> > }
> >
> > +static int imx258_power_on(struct device *dev)
> > +{
> > + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > + struct imx258 *imx258 = to_imx258(sd);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(imx258->clk);
> > + if (ret)
> > + dev_err(dev, "failed to enable clock\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int imx258_power_off(struct device *dev)
> > +{
> > + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > + struct imx258 *imx258 = to_imx258(sd);
> > +
> > + clk_disable_unprepare(imx258->clk);
> > +
> > + return 0;
> > +}
> > +
> > static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
> > {
> > struct imx258 *imx258 = to_imx258(sd);
> > @@ -1199,9 +1228,28 @@ static int imx258_probe(struct i2c_client *client)
> > int ret;
> > u32 val = 0;
> >
> > - device_property_read_u32(&client->dev, "clock-frequency", &val);
> > - if (val != 19200000)
> > - return -EINVAL;
> > + imx258 = devm_kzalloc(&client->dev, sizeof(*imx258), GFP_KERNEL);
> > + if (!imx258)
> > + return -ENOMEM;
> > +
> > + imx258->clk = devm_clk_get_optional(&client->dev, NULL);
> > + if (!imx258->clk) {
> > + dev_dbg(&client->dev,
> > + "no clock provided, using clock-frequency property\n");
> > +
> > + device_property_read_u32(&client->dev, "clock-frequency", &val);
> > + if (val != IMX258_INPUT_CLOCK_FREQ)
> > + return -EINVAL;
> > + } else if (IS_ERR(imx258->clk)) {
> > + return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
> > + "error getting clock\n");
> > + } else {
> > + if (clk_get_rate(imx258->clk) != IMX258_INPUT_CLOCK_FREQ) {
>
> Please move the check outside the conditional block. May be a separate
> patch if you like.
OK
Best regards,
Krzysztof
