Re: [PATCH v5 0/8] media: i2c: Add RDACM21 camera module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On 16/11/2020 13:52, Jacopo Mondi wrote:
> Hello,
>    this v5 mostly changes how the rdacm21 driver handles writes to the
> OV490 chip by handling the 'high' part of the sensor register through an
> helper function as suggested by Kieran and Laurent.
> 
> The diff is available at:
> https://paste.debian.net/1172700/
> 
> Minor fixes in patches subjects and in bindings as reported by Sergei and
> Kieran.
> 
> Bindings have now been sent to DT people now that they've been reviewed
> by Kieran.
> 
> v4: https://patchwork.linuxtv.org/project/linux-media/list/?series=3847
> v3: https://patchwork.linuxtv.org/project/linux-media/list/?series=3657
> 
> Background in v1 cover letter:
> https://www.spinics.net/lists/linux-renesas-soc/msg52886.html
> 
> I have tested on Eagle V3M with 4 RDACM21, but the whole point of
> this series is to retain compatibility with RDACM20.
> 
> For this reason I have included 2 patches on top, not intended for merge
> that re-propose DTS support for the MAXIM max9286 expansion board connected
> to Salvator-X and add the newly introduced property to the DTS file.
> 
> Kieran, I know you have a working setup with RDACM20, the final patches are
> meant for ease your testing. Can you give this series a spin ?


After some rabbit-holes :-D:

A 5-camera capture on Salvator-X - https://pasteboard.co/JAW0PSr.png
For this series, on both Eagle-V3M and Salvator-X

Tested-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>



> Series based on latest renesas-drivers tag: renesas-drivers-2020-11-10-v5.10-rc3
> 
> Thanks
>   j
> 
> Jacopo Mondi (7):
>   media: i2c: Add driver for RDACM21 camera module
>   dt-bindings: media: max9286: Document
>     'maxim,initial-reverse-channel-mV'
>   media: i2c: max9286: Break-out reverse channel setup
>   media: i2c: max9286: Make channel amplitude programmable
>   media: i2c: max9286: Configure reverse channel amplitude
>   [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel
>     amplitude
>   [DNI] arm64: dts: renesas: eagle: Specify channel amplitude
> 
> Laurent Pinchart (1):
>   arm64: dts: renesas: salvator-x: Add MAX9286 expansion board
> 
>  .../bindings/media/i2c/maxim,max9286.yaml     |  23 +
>  MAINTAINERS                                   |  12 +
>  .../arm64/boot/dts/renesas/r8a77970-eagle.dts |   1 +
>  .../boot/dts/renesas/salvator-x-max9286.dtsi  | 396 ++++++++++++
>  drivers/media/i2c/Kconfig                     |  13 +
>  drivers/media/i2c/Makefile                    |   2 +
>  drivers/media/i2c/max9286.c                   |  58 +-
>  drivers/media/i2c/rdacm21.c                   | 595 ++++++++++++++++++
>  8 files changed, 1087 insertions(+), 13 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
>  create mode 100644 drivers/media/i2c/rdacm21.c
> 
> --
> 2.29.1
> 




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux