Calculate the limit offsets and the size of the limit buffer. CCS limits are read into this buffer, and the offsets are helpful in accessing the information in it. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> --- drivers/media/i2c/smiapp/smiapp-core.c | 40 +++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 105ef29152e8..75862e7647f8 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -27,6 +27,7 @@ #include <media/v4l2-fwnode.h> #include <media/v4l2-device.h> +#include "ccs-limits.h" #include "smiapp.h" #define SMIAPP_ALIGN_DIM(dim, flags) \ @@ -34,6 +35,11 @@ ? ALIGN((dim), 2) \ : (dim) & ~1) +static struct ccs_limit_offset { + u16 lim; + u16 info; +} ccs_limit_offsets[CCS_L_LAST + 1]; + /* * smiapp_module_idents - supported camera modules */ @@ -3166,7 +3172,39 @@ static struct i2c_driver smiapp_i2c_driver = { .id_table = smiapp_id_table, }; -module_i2c_driver(smiapp_i2c_driver); +static int smiapp_module_init(void) +{ + unsigned int i, l; + + for (i = 0, l = 0; ccs_limits[i].size && l < CCS_L_LAST; i++) { + if (!(ccs_limits[i].flags & CCS_L_FL_SAME_REG)) { + ccs_limit_offsets[l + 1].lim = + ALIGN(ccs_limit_offsets[l].lim + + ccs_limits[i].size, + ccs_reg_width(ccs_limits[i + 1].reg)); + ccs_limit_offsets[l].info = i; + l++; + } else { + ccs_limit_offsets[l].lim += ccs_limits[i].size; + } + } + + if (WARN_ON(ccs_limits[i].size)) + return -EINVAL; + + if (WARN_ON(l != CCS_L_LAST)) + return -EINVAL; + + return i2c_register_driver(THIS_MODULE, &smiapp_i2c_driver); +} + +static void smiapp_module_cleanup(void) +{ + i2c_del_driver(&smiapp_i2c_driver); +} + +module_init(smiapp_module_init); +module_exit(smiapp_module_cleanup); MODULE_AUTHOR("Sakari Ailus <sakari.ailus@xxxxxx>"); MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver"); -- 2.27.0