Re: [PATCH v1 00/30] Introduce core voltage scaling for NVIDIA Tegra20/30 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 12, 2020 at 10:57:27PM +0300, Dmitry Osipenko wrote:
> 11.11.2020 14:38, Ulf Hansson пишет:
> > On Sun, 8 Nov 2020 at 13:19, Dmitry Osipenko <digetx@xxxxxxxxx> wrote:
> >>
> >> 05.11.2020 18:22, Dmitry Osipenko пишет:
> >>> 05.11.2020 12:45, Ulf Hansson пишет:
> >>> ...
> >>>> I need some more time to review this, but just a quick check found a
> >>>> few potential issues...
> >>>
> >>> Thank you for starting the review! I'm pretty sure it will take a couple
> >>> revisions until all the questions will be resolved :)
> >>>
> >>>> The "core-supply", that you specify as a regulator for each
> >>>> controller's device node, is not the way we describe power domains.
> >>>> Instead, it seems like you should register a power-domain provider
> >>>> (with the help of genpd) and implement the ->set_performance_state()
> >>>> callback for it. Each device node should then be hooked up to this
> >>>> power-domain, rather than to a "core-supply". For DT bindings, please
> >>>> have a look at Documentation/devicetree/bindings/power/power-domain.yaml
> >>>> and Documentation/devicetree/bindings/power/power_domain.txt.
> >>>>
> >>>> In regards to the "sync state" problem (preventing to change
> >>>> performance states until all consumers have been attached), this can
> >>>> then be managed by the genpd provider driver instead.
> >>>
> >>> I'll need to take a closer look at GENPD, thank you for the suggestion.
> >>>
> >>> Sounds like a software GENPD driver which manages clocks and voltages
> >>> could be a good idea, but it also could be an unnecessary
> >>> over-engineering. Let's see..
> >>>
> >>
> >> Hello Ulf and all,
> >>
> >> I took a detailed look at the GENPD and tried to implement it. Here is
> >> what was found:
> >>
> >> 1. GENPD framework doesn't aggregate performance requests from the
> >> attached devices. This means that if deviceA requests performance state
> >> 10 and then deviceB requests state 3, then framework will set domain's
> >> state to 3 instead of 10.
> >>
> >> https://elixir.bootlin.com/linux/v5.10-rc2/source/drivers/base/power/domain.c#L376
> > 
> > As Viresh also stated, genpd does aggregate the votes. It even
> > performs aggregation hierarchy (a genpd is allowed to have parent(s)
> > to model a topology).
> 
> Yes, I already found and fixed the bug which confused me previously and
> it's working well now.
> 
> >> 2. GENPD framework has a sync() callback in the genpd.domain structure,
> >> but this callback isn't allowed to be used by the GENPD implementation.
> >> The GENPD framework always overrides that callback for its own needs.
> >> Hence GENPD doesn't allow to solve the bootstrapping
> >> state-synchronization problem in a nice way.
> >>
> >> https://elixir.bootlin.com/linux/v5.10-rc2/source/drivers/base/power/domain.c#L2606
> > 
> > That ->sync() callback isn't the callback you are looking for, it's a
> > PM domain specific callback - and has other purposes.
> > 
> > To solve the problem you refer to, your genpd provider driver (a
> > platform driver) should assign its ->sync_state() callback. The
> > ->sync_state() callback will be invoked, when all consumer devices
> > have been attached (and probed) to their corresponding provider.
> > 
> > You may have a look at drivers/cpuidle/cpuidle-psci-domain.c, to see
> > an example of how this works. If there is anything unclear, just tell
> > me and I will try to help.
> 
> Indeed, thank you for the clarification. This variant works well.
> 
> >> 3. Tegra doesn't have a dedicated hardware power-controller for the core
> >> domain, instead there is only an external voltage regulator. Hence we
> >> will need to create a phony device-tree node for the virtual power
> >> domain, which is probably a wrong thing to do.
> > 
> > No, this is absolutely the correct thing to do.
> > 
> > This isn't a virtual power domain, it's a real power domain. You only
> > happen to model the control of it as a regulator, as it fits nicely
> > with that for *this* SoC. Don't get me wrong, that's fine as long as
> > the supply is specified only in the power-domain provider node.
> > 
> > On another SoC, you might have a different FW interface for the power
> > domain provider that doesn't fit well with the regulator. When that
> > happens, all you need to do is to implement a new power domain
> > provider and potentially re-define the power domain topology. More
> > importantly, you don't need to re-invent yet another slew of device
> > specific bindings - for each SoC.
> > 
> >>
> >> ===
> >>
> >> Perhaps it should be possible to create some hacks to work around
> >> bullets 2 and 3 in order to achieve what we need for DVFS on Tegra, but
> >> bullet 1 isn't solvable without changing how the GENPD core works.
> >>
> >> Altogether, the GENPD in its current form is a wrong abstraction for a
> >> system-wide DVFS in a case where multiple devices share power domain and
> >> this domain is a voltage regulator. The regulator framework is the
> >> correct abstraction in this case for today.
> > 
> > Well, I admit it's a bit complex. But it solves the problem in a
> > nicely abstracted way that should work for everybody, at least in my
> > opinion.
> 
> The OPP framework supports both voltage regulator and power domain,
> hiding the implementation details from drivers. This means that OPP API
> usage will be the same regardless of what approach (regulator or power
> domain) is used for a particular SoC.
> 
> > Although, let's not exclude that there are pieces missing in genpd or
> > the opp layer, as this DVFS feature is rather new - but then we should
> > just extend/fix it.
> 
> Will be nice to have a per-device GENPD performance stats.
> 
> Thierry, could you please let me know what do you think about replacing
> regulator with the power domain? Do you think it's a worthwhile change?
> 
> The difference in comparison to using voltage regulator directly is
> minimal, basically the core-supply phandle is replaced is replaced with
> a power-domain phandle in a device tree.

These new power-domain handles would have to be added to devices that
potentially already have a power-domain handle, right? Isn't that going
to cause issues? I vaguely recall that we already have multiple power
domains for the XUSB controller and we have to jump through extra hoops
to make that work.

> The only thing which makes me feel a bit uncomfortable is that there is
> no real hardware node for the power domain node in a device-tree.

Could we anchor the new power domain at the PMC for example? That would
allow us to avoid the "virtual" node. On the other hand, if we were to
use a regulator, we'd be adding a node for that, right? So isn't this
effectively going to be the same node if we use a power domain? Both
software constructs are using the same voltage regulator, so they should
be able to be described by the same device tree node, shouldn't they?

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux