[PATCH v4 7/8] [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel amplitude

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the newly introduced 'maxim,maxim,initial-reverse-channel-mV'
property to specify the initial reverse channel amplitude when
the remote serializers are pre-programmed with noise immunity threshold
enabled.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
index 6f4798859542..f14a133b7302 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
@@ -128,6 +128,7 @@ gmsl-deserializer@4c {
 		compatible = "maxim,max9286";
 		reg = <0x4c>;
 		poc-supply = <&poc_12v>;
+		maxim,initial-reverse-channel-mV = <170>;
 
 		ports {
 			#address-cells = <1>;
@@ -263,6 +264,7 @@ gmsl-deserializer@6c {
 		compatible = "maxim,max9286";
 		reg = <0x6c>;
 		poc-supply = <&poc_12v>;
+		maxim,initial-reverse-channel-mV = <170>;
 
 		ports {
 			#address-cells = <1>;
-- 
2.29.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux