Add bindings documentation for Microchip CSI2 Demultiplexer controller. CSI2DC is a demultiplexer from Synopsys IDI interface specification to parallel interface connection or direct memory access. Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> --- Changes in v4: - Removed property for inter-line-delay and for clock continuous/non-continuous - Removed virtual channel by reg for second endpoint Changes in v3: - Removed some text from description, as it was explained in the schema - fixed other things as per Rob's review - moved some text inside the schema, like the clock description Changes in v2: - fixed warnings reported by dt_binding_check .../bindings/media/microchip,csi2dc.yaml | 144 ++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/microchip,csi2dc.yaml diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml new file mode 100644 index 000000000000..967e8fefe363 --- /dev/null +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip CSI2 Demux Controller (CSI2DC) + +maintainers: + - Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> + +description: + CSI2DC - Camera Serial Interface 2 Demux Controller + + CSI2DC is a hardware block that receives incoming data from an IDI interface + and filters packets based on their data type and virtual channel identifier, + then converts the byte stream into a cross clock domain to a pixel stream + to a parallel interface that can be read by a sensor controller. + + CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe + is connected to a sensor controller and the data pipe is accessible + as a DMA slave port to a DMA controller. + + CSI2DC supports a single 'port' node as a source pad with Synopsys 32-bit + IDI interface. The connected endpoint must be a IDI interface compatible + device (like Synopsys CSI2HOST) , that can provide 32-bit IDI interface + connection as sink pad. + For media entity and endpoints please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + For Synopsys IDI interface please refer to + Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt + + CSI2DC supports one 'port' node as sink pad with parallel interface. This is + called video pipe. + This port has an 'endpoint' can then be used as a source pad for another + controller (next in pipeline). + Please refer to the bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + CSI2DC also supports direct access to the data through AHB, via DMA channel, + called data pipe. + Because of this, the sink 'port' child node (second) is not mandatory. + If the sink 'port' child node is missing, only data pipe is available. + +properties: + compatible: + const: microchip,sama7g5-csi2dc + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + description: + CSI2DC must have two clocks to function correctly. One clock is the + peripheral clock for the inside functionality of the hardware block. + This is named 'pclk'. The second clock must be the cross domain clock, + in which CSI2DC will perform clock crossing. This clock must be fed + by the next controller in pipeline, which usually is a sensor controller. + Normally this clock should be given by this sensor controller who + is also a clock source. This clock is named 'scck', sensor controller clock. + items: + - const: pclk + - const: scck + + port@0: + type: object + description: + Input port node, single endpoint describing the input pad. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + port@1: + type: object + description: + Output port node, single endpoint, describing the output pad. + + properties: + reg: + const: 1 + + endpoint: + type: object + + properties: + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - port@0 + +examples: + - | + csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe1404000 0x500>; + clocks = <&pclk>, <&scck>; + clock-names = "pclk", "scck"; + + port@0 { + reg = <0>; /* must be 0, first child port */ + csi2dc_in: endpoint { /* input from IDI interface */ + remote-endpoint = <&csi2host_out>; + }; + }; + + port@1 { + reg = <1>; /* must be 1, second child port */ + csi2dc_out: endpoint { + remote-endpoint = <&xisc_in>; /* output to sensor controller */ + }; + }; + }; + +... -- 2.25.1
