Now that the MBUS quirks are applied by our global notifier, we can
remove them from our DRM driver.
Suggested-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index 55960cbb1019..522e51a404cc 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -805,25 +805,6 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
ret = of_dma_configure(drm->dev, dev->of_node, true);
if (ret)
return ret;
- } else {
- /*
- * If we don't have the interconnect property, most likely
- * because of an old DT, we need to set the DMA offset by hand
- * on our device since the RAM mapping is at 0 for the DMA bus,
- * unlike the CPU.
- *
- * XXX(hch): this has no business in a driver and needs to move
- * to the device tree.
- *
- * If we have two subsequent calls to dma_direct_set_offset
- * returns -EINVAL. Unfortunately, this happens when we have two
- * backends in the system, and will result in the driver
- * reporting an error while it has been setup properly before.
- * Ignore EINVAL, but it should really be removed eventually.
- */
- ret = dma_direct_set_offset(drm->dev, PHYS_OFFSET, 0, SZ_4G);
- if (ret && ret != -EINVAL)
- return ret;
}
backend->engine.node = dev->of_node;
--
2.28.0
