Hi Alexandre, On Thu, Nov 05, 2020 at 10:26:37AM +0100, Alexandre Torgue wrote: > Hi Huges > > On 11/4/20 6:32 PM, Hugues Fruchet wrote: > > Add support of BT656 embedded synchronization bus. > > This mode allows to save hardware synchro lines hsync & vsync > > by replacing them with synchro codes embedded in data stream. > > Add "bus-type" property and make it required so that there is no > > ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6). > > > > =========== > > = history = > > =========== > > version 5: > > - Add revisited bindings and devicetree with explicit use of "bus-type" > > > > version 4: > > - Fix typo in commit message > > > > version 3: > > - Fix bus_width print to %u as per Sakari comment > > > > version 2: > > - As per Sakari remark, revisit commit message and document > > BT656 parallel bus mode in bindings > > > > version 1: > > - Initial submission > > > > Hugues Fruchet (4): > > media: stm32-dcmi: add support of BT656 bus > > media: dt-bindings: media: st,stm32-dcmi: add support of BT656 bus > > ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 > > board > > ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval > > board > > > > .../devicetree/bindings/media/st,stm32-dcmi.yaml | 38 ++++++++++++++++++++++ > > arch/arm/boot/dts/stm32429i-eval.dts | 1 + > > arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 + > > drivers/media/platform/stm32/stm32-dcmi.c | 37 +++++++++++++++++++-- > > 4 files changed, 75 insertions(+), 2 deletions(-) > > > > I'll take DT patches on stm32-next tree. Just checking: that is only the two last patches in the set, or also the binding patch? -- Regards, Sakari Ailus
