Em Wed, 7 Oct 2020 11:45:14 +0300
Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> escreveu:
> The CCS pll is used by the CCS driver at the moment, but documenting the
> interface makes sense. It's non-trivial and the calculator could be used
> elsewhere.
LFTM.
It could make sense to add a .. kernel-doc:: markup at the documentation
somewhere.
Regards,
Mauro
>
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ccs-pll.h | 88 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h
> index 1d908b23c934..e01359f61476 100644
> --- a/drivers/media/i2c/ccs-pll.h
> +++ b/drivers/media/i2c/ccs-pll.h
> @@ -20,6 +20,16 @@
> #define CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0)
> #define CCS_PLL_FLAG_NO_OP_CLOCKS (1 << 1)
>
> +/**
> + * struct ccs_pll_branch_fr - CCS PLL configuration (front)
> + *
> + * A single branch front-end of the CCS PLL tree.
> + *
> + * @pre_pll_clk_div: Pre-PLL clock divisor
> + * @pll_multiplier: PLL multiplier
> + * @pll_ip_freq_hz: PLL input clock frequency
> + * @pll_op_freq_hz: PLL output clock frequency
> + */
> struct ccs_pll_branch_fr {
> uint16_t pre_pll_clk_div;
> uint16_t pll_multiplier;
> @@ -27,6 +37,16 @@ struct ccs_pll_branch_fr {
> uint32_t pll_op_clk_freq_hz;
> };
>
> +/**
> + * struct ccs_pll_branch_bk - CCS PLL configuration (back)
> + *
> + * A single branch back-end of the CCS PLL tree.
> + *
> + * @sys_clk_div: System clock divider
> + * @pix_clk_div: Pixel clock divider
> + * @sys_clk_freq_hz: System clock frequency
> + * @pix_clk_freq_hz: Pixel clock frequency
> + */
> struct ccs_pll_branch_bk {
> uint16_t sys_clk_div;
> uint16_t pix_clk_div;
> @@ -34,6 +54,29 @@ struct ccs_pll_branch_bk {
> uint32_t pix_clk_freq_hz;
> };
>
> +/**
> + * struct ccs_pll - Full CCS PLL configuration
> + *
> + * All information required to calculate CCS PLL configuration.
> + *
> + * @bus_type: Type of the data bus, CCS_PLL_BUS_TYPE_* (input)
> + * @csi2.lanes: The number of the CSI-2 data lanes (input)
> + * @binning_vertical: Vertical binning factor (input)
> + * @binning_horizontal: Horizontal binning factor (input)
> + * @scale_m: Downscaling factor, M component, [16, max] (input)
> + * @scale_n: Downscaling factor, N component, typically 16 (input)
> + * @bits_per_pixel: Bits per pixel on the output data bus (input)
> + * @flags: CCS_PLL_FLAG_* (input)
> + * @link_freq: Chosen link frequency (input)
> + * @ext_clk_freq_hz: External clock frequency, i.e. the sensor's input clock
> + * (input)
> + * @vt_fr: Video timing front-end configuration (output)
> + * @vt_bk: Video timing back-end configuration (output)
> + * @op_bk: Operational timing back-end configuration (output)
> + * @pixel_rate_csi: Pixel rate on the output data bus (output)
> + * @pixel_rate_pixel_array: Nominal pixel rate in the sensor's pixel array
> + * (output)
> + */
> struct ccs_pll {
> /* input values */
> uint8_t bus_type;
> @@ -58,6 +101,18 @@ struct ccs_pll {
> uint32_t pixel_rate_pixel_array;
> };
>
> +/**
> + * struct ccs_pll_branch_limits_fr - CCS PLL front-end limits
> + *
> + * @min_pre_pll_clk_div: Minimum pre-PLL clock divider
> + * @max_pre_pll_clk_div: Maximum pre-PLL clock divider
> + * @min_pll_ip_freq_hz: Minimum PLL input clock frequency
> + * @max_pll_ip_freq_hz: Maximum PLL input clock frequency
> + * @min_pll_multiplier: Minimum PLL multiplier
> + * @max_pll_multiplier: Maximum PLL multiplier
> + * @min_pll_op_freq_hz: Minimum PLL output clock frequency
> + * @max_pll_op_freq_hz: Maximum PLL output clock frequency
> + */
> struct ccs_pll_branch_limits_fr {
> uint16_t min_pre_pll_clk_div;
> uint16_t max_pre_pll_clk_div;
> @@ -69,6 +124,18 @@ struct ccs_pll_branch_limits_fr {
> uint32_t max_pll_op_clk_freq_hz;
> };
>
> +/**
> + * struct ccs_pll_branch_limits_bk - CCS PLL back-end limits
> + *
> + * @min_sys_clk_div: Minimum system clock divider
> + * @max_sys_clk_div: Maximum system clock divider
> + * @min_sys_clk_freq_hz: Minimum system clock frequency
> + * @max_sys_clk_freq_hz: Maximum system clock frequency
> + * @min_pix_clk_div: Minimum pixel clock divider
> + * @max_pix_clk_div: Maximum pixel clock divider
> + * @min_pix_clk_freq_hz: Minimum pixel clock frequency
> + * @max_pix_clk_freq_hz: Maximum pixel clock frequency
> + */
> struct ccs_pll_branch_limits_bk {
> uint16_t min_sys_clk_div;
> uint16_t max_sys_clk_div;
> @@ -80,6 +147,17 @@ struct ccs_pll_branch_limits_bk {
> uint32_t max_pix_clk_freq_hz;
> };
>
> +/**
> + * struct ccs_pll_limits - CCS PLL limits
> + *
> + * @min_ext_clk_freq_hz: Minimum external clock frequency
> + * @max_ext_clk_freq_hz: Maximum external clock frequency
> + * @vt_fr: Video timing front-end limits
> + * @vt_bk: Video timing back-end limits
> + * @op_bk: Operational timing back-end limits
> + * @min_line_length_pck_bin: Minimum line length in pixels, with binning
> + * @min_line_length_pck: Minimum line length in pixels without binning
> + */
> struct ccs_pll_limits {
> /* Strict PLL limits */
> uint32_t min_ext_clk_freq_hz;
> @@ -96,6 +174,16 @@ struct ccs_pll_limits {
>
> struct device;
>
> +/**
> + * ccs_pll_calculate - Calculate CCS PLL configuration based on input parameters
> + *
> + * @dev: Device pointer, used for printing messages
> + * @limits: Limits specific to the sensor
> + * @pll: Given PLL configuration
> + *
> + * Calculate the CCS PLL configuration based on the limits as well as given
> + * device specific, system specific or user configured input data.
> + */
> int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *limits,
> struct ccs_pll *pll);
>
Thanks,
Mauro
