The driver structure name is referred to with different names ('ov5647',
'state', 'sensor') in different functions in the driver.
Polish this up by using 'struct ov5647 *sensor' everywhere.
Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
drivers/media/i2c/ov5647.c | 46 +++++++++++++++++++-------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 4a009848cefc8..91193706b6fe1 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -98,7 +98,7 @@ struct ov5647 {
struct v4l2_ctrl_handler ctrls;
};
-static inline struct ov5647 *to_state(struct v4l2_subdev *sd)
+static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd)
{
return container_of(sd, struct ov5647, sd);
}
@@ -310,7 +310,7 @@ static int ov5647_set_mode(struct v4l2_subdev *sd)
static int ov5647_stream_on(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5647 *ov5647 = to_state(sd);
+ struct ov5647 *sensor = to_sensor(sd);
u8 val = MIPI_CTRL00_BUS_IDLE;
int ret;
@@ -325,7 +325,7 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
if (ret)
return ret;
- if (ov5647->clock_ncont)
+ if (sensor->clock_ncont)
val |= MIPI_CTRL00_CLOCK_LANE_GATE |
MIPI_CTRL00_LINE_SYNC_ENABLE;
@@ -376,20 +376,20 @@ static int set_sw_standby(struct v4l2_subdev *sd, bool standby)
static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5647 *ov5647 = to_state(sd);
+ struct ov5647 *sensor = to_sensor(sd);
int ret = 0;
- mutex_lock(&ov5647->lock);
+ mutex_lock(&sensor->lock);
- if (on && !ov5647->power_count) {
+ if (on && !sensor->power_count) {
dev_dbg(&client->dev, "OV5647 power on\n");
- if (ov5647->pwdn) {
- gpiod_set_value_cansleep(ov5647->pwdn, 0);
+ if (sensor->pwdn) {
+ gpiod_set_value_cansleep(sensor->pwdn, 0);
msleep(PWDN_ACTIVE_DELAY_MS);
}
- ret = clk_prepare_enable(ov5647->xclk);
+ ret = clk_prepare_enable(sensor->xclk);
if (ret < 0) {
dev_err(&client->dev, "clk prepare enable failed\n");
goto out;
@@ -398,7 +398,7 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
ret = ov5647_write_array(sd, sensor_oe_enable_regs,
ARRAY_SIZE(sensor_oe_enable_regs));
if (ret < 0) {
- clk_disable_unprepare(ov5647->xclk);
+ clk_disable_unprepare(sensor->xclk);
dev_err(&client->dev,
"write sensor_oe_enable_regs error\n");
goto out;
@@ -407,12 +407,12 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
/* Stream off to coax lanes into LP-11 state. */
ret = ov5647_stream_off(sd);
if (ret < 0) {
- clk_disable_unprepare(ov5647->xclk);
+ clk_disable_unprepare(sensor->xclk);
dev_err(&client->dev,
"Camera not available, check Power\n");
goto out;
}
- } else if (!on && ov5647->power_count == 1) {
+ } else if (!on && sensor->power_count == 1) {
dev_dbg(&client->dev, "OV5647 power off\n");
ret = ov5647_write_array(sd, sensor_oe_disable_regs,
@@ -424,16 +424,16 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
if (ret < 0)
dev_dbg(&client->dev, "soft stby failed\n");
- clk_disable_unprepare(ov5647->xclk);
- gpiod_set_value_cansleep(ov5647->pwdn, 1);
+ clk_disable_unprepare(sensor->xclk);
+ gpiod_set_value_cansleep(sensor->pwdn, 1);
}
/* Update the power count. */
- ov5647->power_count += on ? 1 : -1;
- WARN_ON(ov5647->power_count < 0);
+ sensor->power_count += on ? 1 : -1;
+ WARN_ON(sensor->power_count < 0);
out:
- mutex_unlock(&ov5647->lock);
+ mutex_unlock(&sensor->lock);
return ret;
}
@@ -473,7 +473,7 @@ static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
{
- struct ov5647 *sensor = to_state(sd);
+ struct ov5647 *sensor = to_sensor(sd);
int ret;
mutex_lock(&sensor->lock);
@@ -863,13 +863,13 @@ static int ov5647_probe(struct i2c_client *client)
static int ov5647_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ov5647 *ov5647 = to_state(sd);
+ struct ov5647 *sensor = to_sensor(sd);
- v4l2_async_unregister_subdev(&ov5647->sd);
- media_entity_cleanup(&ov5647->sd.entity);
- v4l2_ctrl_handler_free(&ov5647->ctrls);
+ v4l2_async_unregister_subdev(&sensor->sd);
+ media_entity_cleanup(&sensor->sd.entity);
+ v4l2_ctrl_handler_free(&sensor->ctrls);
v4l2_device_unregister_subdev(sd);
- mutex_destroy(&ov5647->lock);
+ mutex_destroy(&sensor->lock);
return 0;
}
--
2.29.1
