Re: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nice catch! This patch looks good to me.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>

On Sun, 18 Oct 2020 at 14:54, <kholk11@xxxxxxxxx> wrote:
>
> From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
>
> Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
> for dual-camera or simply because a secondary camera is connected
> to it: in this case the reset will always happen on the VFE0 ctx
> of the ISPIF, which is .. useless.
>
> Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
> where to do the (or what to) reset based on the VFE line id.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> ---
>  .../media/platform/qcom/camss/camss-ispif.c   | 87 ++++++++++++-------
>  .../media/platform/qcom/camss/camss-ispif.h   |  2 +-
>  2 files changed, 57 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> index db94cfd6c508..252db6b33dab 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> @@ -26,6 +26,7 @@
>  #define MSM_ISPIF_NAME "msm_ispif"
>
>  #define ISPIF_RST_CMD_0                        0x008
> +#define ISPIF_RST_CMD_1                        0x00c
>  #define ISPIF_RST_CMD_0_STROBED_RST_EN         (1 << 0)
>  #define ISPIF_RST_CMD_0_MISC_LOGIC_RST         (1 << 1)
>  #define ISPIF_RST_CMD_0_SW_REG_RST             (1 << 2)
> @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
>         writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>
>         if ((value0 >> 27) & 0x1)
> -               complete(&ispif->reset_complete);
> +               complete(&ispif->reset_complete[0]);
> +
> +       if ((value3 >> 27) & 0x1)
> +               complete(&ispif->reset_complete[1]);
>
>         if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
>                 dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
>         writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
>
>         if ((value0 >> 27) & 0x1)
> -               complete(&ispif->reset_complete);
> +               complete(&ispif->reset_complete[0]);
>
>         if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
>                 dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> @@ -257,33 +261,17 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
>         return IRQ_HANDLED;
>  }
>
> -/*
> - * ispif_reset - Trigger reset on ISPIF module and wait to complete
> - * @ispif: ISPIF device
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int ispif_reset(struct ispif_device *ispif)
> +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
>  {
> -       unsigned long time;
>         u32 val;
> -       int ret;
> -
> -       ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> -       if (ret < 0)
> -               return ret;
>
> -       ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> -       if (ret < 0)
> -               return ret;
> -
> -       ret = camss_enable_clocks(ispif->nclocks_for_reset,
> -                                 ispif->clock_for_reset,
> -                                 to_device(ispif));
> -       if (ret < 0)
> -               return ret;
> +       if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
> +               dev_err(to_device(ispif),
> +                       "Error: asked reset for invalid VFE%d\n", vfe_id);
> +               return -ENOENT;
> +       }
>
> -       reinit_completion(&ispif->reset_complete);
> +       reinit_completion(&ispif->reset_complete[vfe_id]);
>
>         val = ISPIF_RST_CMD_0_STROBED_RST_EN |
>                 ISPIF_RST_CMD_0_MISC_LOGIC_RST |
> @@ -303,15 +291,51 @@ static int ispif_reset(struct ispif_device *ispif)
>                 ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
>                 ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
>
> -       writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> +       if (vfe_id == 1)
> +               writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
> +       else
> +               writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
>
> -       time = wait_for_completion_timeout(&ispif->reset_complete,
> +       time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
>                 msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
>         if (!time) {
> -               dev_err(to_device(ispif), "ISPIF reset timeout\n");
> -               ret = -EIO;
> +               dev_err(to_device(ispif),
> +                       "ISPIF for VFE%d reset timeout\n", vfe_id);
> +               return -EIO;
>         }
>
> +       return 0;
> +}
> +
> +/*
> + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> + * @ispif: ISPIF device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
> +{
> +       unsigned long time;
> +       int ret;
> +
> +       ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> +       if (ret < 0)
> +               return ret;
> +
> +       ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> +       if (ret < 0)
> +               return ret;
> +
> +       ret = camss_enable_clocks(ispif->nclocks_for_reset,
> +                                 ispif->clock_for_reset,
> +                                 to_device(ispif));
> +       if (ret < 0)
> +               return ret;
> +
> +       ret = ispif_vfe_reset(ispif, vfe_id);
> +       if (ret)
> +               dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
> +
>         camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
>
>         camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
> @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
>                         goto exit;
>                 }
>
> -               ret = ispif_reset(ispif);
> +               ret = ispif_reset(ispif, line->vfe_id);
>                 if (ret < 0) {
>                         pm_runtime_put_sync(dev);
>                         camss_disable_clocks(ispif->nclocks, ispif->clock);
> @@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
>
>         mutex_init(&ispif->config_lock);
>
> -       init_completion(&ispif->reset_complete);
> +       for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
> +               init_completion(&ispif->reset_complete[i]);
>
>         return 0;
>  }
> diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
> index 1a5ba2425a42..4132174f7ea1 100644
> --- a/drivers/media/platform/qcom/camss/camss-ispif.h
> +++ b/drivers/media/platform/qcom/camss/camss-ispif.h
> @@ -56,7 +56,7 @@ struct ispif_device {
>         int nclocks;
>         struct camss_clock  *clock_for_reset;
>         int nclocks_for_reset;
> -       struct completion reset_complete;
> +       struct completion reset_complete[MSM_ISPIF_VFE_NUM];
>         int power_count;
>         struct mutex power_lock;
>         struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
> --
> 2.28.0
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux