Re: [PATCH v2 3/3] dt-bindings: imx7-mipi-csi2: convert bindings to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rui,

On Wed, Oct 14, 2020 at 03:27:59PM +0100, Rui Miguel Silva wrote:
> Convert imx7 mipi csi2 bindings documentation to yaml schema, remove
> the textual document and update MAINTAINERS entry.
>
> Signed-off-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
> ---
>  .../bindings/media/imx7-mipi-csi2.txt         |  90 ---------
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    | 181 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +-
>  3 files changed, 182 insertions(+), 91 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
> deleted file mode 100644
> index 71fd74ed3ec8..000000000000
> --- a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
> +++ /dev/null
> @@ -1,90 +0,0 @@
> -Freescale i.MX7 Mipi CSI2
> -=========================
> -
> -mipi_csi2 node
> ---------------
> -
> -This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
> -compatible with previous version of Samsung D-phy.
> -
> -Required properties:
> -
> -- compatible    : "fsl,imx7-mipi-csi2";
> -- reg           : base address and length of the register set for the device;
> -- interrupts    : should contain MIPI CSIS interrupt;
> -- clocks        : list of clock specifiers, see
> -        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
> -- clock-names   : must contain "pclk", "wrap" and "phy" entries, matching
> -                  entries in the clock property;
> -- power-domains : a phandle to the power domain, see
> -          Documentation/devicetree/bindings/power/power_domain.txt for details.
> -- reset-names   : should include following entry "mrst";
> -- resets        : a list of phandle, should contain reset entry of
> -                  reset-names;
> -- phy-supply    : from the generic phy bindings, a phandle to a regulator that
> -	          provides power to MIPI CSIS core;
> -
> -Optional properties:
> -
> -- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
> -		    value when this property is not specified is 166 MHz;
> -- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
> -
> -The device node should contain two 'port' child nodes with one child 'endpoint'
> -node, according to the bindings defined in:
> - Documentation/devicetree/bindings/ media/video-interfaces.txt.
> - The following are properties specific to those nodes.
> -
> -port node
> ----------
> -
> -- reg		  : (required) can take the values 0 or 1, where 0 shall be
> -                     related to the sink port and port 1 shall be the source
> -                     one;
> -
> -endpoint node
> --------------
> -
> -- data-lanes    : (required) an array specifying active physical MIPI-CSI2
> -		    data input lanes and their mapping to logical lanes; this
> -                    shall only be applied to port 0 (sink port), the array's
> -                    content is unused only its length is meaningful,
> -                    in this case the maximum length supported is 2;
> -
> -example:
> -
> -        mipi_csi: mipi-csi@30750000 {
> -                #address-cells = <1>;
> -                #size-cells = <0>;
> -
> -                compatible = "fsl,imx7-mipi-csi2";
> -                reg = <0x30750000 0x10000>;
> -                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> -                clocks = <&clks IMX7D_IPG_ROOT_CLK>,
> -                                <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
> -                                <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
> -                clock-names = "pclk", "wrap", "phy";
> -                clock-frequency = <166000000>;
> -                power-domains = <&pgc_mipi_phy>;
> -                phy-supply = <&reg_1p0d>;
> -                resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
> -                reset-names = "mrst";
> -                fsl,csis-hs-settle = <3>;
> -
> -                port@0 {
> -                        reg = <0>;
> -
> -                        mipi_from_sensor: endpoint {
> -                                remote-endpoint = <&ov2680_to_mipi>;
> -                                data-lanes = <1>;
> -                        };
> -                };
> -
> -                port@1 {
> -                        reg = <1>;
> -
> -                        mipi_vc0_to_csi_mux: endpoint {
> -                                remote-endpoint = <&csi_mux_from_mipi_vc0>;
> -                        };
> -                };
> -        };
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> new file mode 100644
> index 000000000000..0438b28232ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -0,0 +1,181 @@
> +# SPDX-License-Identifier: GPL-2.0-only

Same question about dual licensing

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX7 Mipi CSI2
> +
> +maintainers:
> +  - Rui Miguel Silva <rmfrfs@xxxxxxxxx>
> +
> +description: |
> +  this is the device node for the mipi csi-2 receiver core in i.mx7 soc. it is
> +  compatible with previous version of samsung d-phy.

nit: missing a few captial letters (beginning and after a full stop).
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,imx7-mipi-csi2

Should enum with a single item be expressed as a const ?

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: wrap
> +      - const: phy
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  phy-supply:
> +    description:
> +      Phandle to a regulator that provides power to the PHY. This
> +      regulator will be managed during the PHY power on/off sequence.
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: mrst
> +
> +  clock-frequency:

This was here already, but shouldn't this property be assigned in the
clock provider and you should have here a reference to it ? Otherwise,
is this really a custom property hijacking a standard property name ?

I see it is mentioned in the example-schema.yaml, so it's probably
correct.

> +    description:
> +      The IP main (system bus) clock frequency in Hertz
> +    default: 166000000
> +
> +  fsl,csis-hs-settle:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      differential receiver (HS-RX) settle time

You have used capital letters at the beginning of documentation blocks
before.

> +
> +  ports:
> +    type: object
> +    description:
> +      A node containing input and output port nodes with endpoint definitions
> +      as documented in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +    properties:
> +      '#address-cells':
> +        const: 1
> +
> +      '#size-cells':
> +        const: 0
> +
> +      port@0:
> +        type: object
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          reg:
> +            const: 0
> +
> +          endpoint:
> +            type: object
> +
> +            properties:
> +              data-lanes:
> +                maxItems: 1

How many data lanes does this receiver supports ? I see in the txt
bindingsd:
    data-lanes    : (required) an array specifying active physical MIPI-CSI2
                    data input lanes and their mapping to logical lanes; this
                    shall only be applied to port 0 (sink port), the array's
                    content is unused only its length is meaningful,
                    in this case the maximum length supported is 2;

I'm not sure I fully get this. Does this mean up to 2 data lanes are
supported ?

> +
> +              remote-endpoint: true
> +
> +            required:
> +              - data-lanes
> +              - remote-endpoint
> +
> +            additionalProperties: false
> +
> +        additionalProperties: false
> +
> +      port@1:
> +        type: object
> +        description:
> +          Output port node,

Rougue ',' at the end. You probably want a full stop or
> +
> +        properties:
> +          reg:
> +            const: 1
> +
> +          endpoint:
> +              type: object
> +
> +              properties:
> +                remote-endpoint: true
> +
> +              required:
> +                - remote-endpoint
> +
> +              additionalProperties: false

As no other endpoint property is specified, the whole 'endpoint' block
can probably be omitted ?

> +
> +        additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +  - ports

phy-supply was listed as required in the txt bindings

> +
> +unevaluatedProperties: false

additionalProperties: false

Thanks
  j

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx7d-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/reset/imx7-reset.h>
> +
> +    mipi_csi: mipi-csi@30750000 {
> +            compatible = "fsl,imx7-mipi-csi2";
> +            reg = <0x30750000 0x10000>;
> +            interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +
> +            clocks = <&clks IMX7D_IPG_ROOT_CLK>,
> +                     <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
> +                     <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
> +            clock-names = "pclk", "wrap", "phy";
> +            clock-frequency = <166000000>;
> +
> +            power-domains = <&pgc_mipi_phy>;
> +            phy-supply = <&reg_1p0d>;
> +            resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
> +            reset-names = "mrst";
> +            fsl,csis-hs-settle = <3>;
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@0 {
> +                            reg = <0>;
> +
> +                            mipi_from_sensor: endpoint {
> +                                    remote-endpoint = <&ov2680_to_mipi>;
> +                                    data-lanes = <1>;
> +                            };
> +                    };
> +
> +                    port@1 {
> +                            reg = <1>;
> +
> +                            mipi_vc0_to_csi_mux: endpoint {
> +                                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
> +                            };
> +                    };
> +            };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b7f7f14cd85b..9da67222b0c7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10773,8 +10773,8 @@ L:	linux-media@xxxxxxxxxxxxxxx
>  S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/admin-guide/media/imx7.rst
> -F:	Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
>  F:	Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> +F:	Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
>  F:	drivers/staging/media/imx/imx7-media-csi.c
>  F:	drivers/staging/media/imx/imx7-mipi-csis.c
>
> --
> 2.28.0
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux