On Tue, Mar 30, 2010 at 04:06:11PM +0200, Rodolfo Giometti wrote:
> On Tue, Feb 23, 2010 at 12:19:13AM +0100, Richard Röjfors wrote:
> >
> > We use it as a subdev to a driver not yet committed from us. So I think
> > you should extend it, not move it.
>
> Finally I got something functional... but I'm puzzled to know how I
> can add platform data configuration struct by using the I2C's
> platform_data pointer if it is already used to hold struct
> soc_camera_device... O_o
Here my solution:
static __devinit int adv7180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adv7180_state *state;
#if defined(CONFIG_SOC_CAMERA)
struct soc_camera_device *icd = client->dev.platform_data;
struct soc_camera_link *icl;
struct adv7180_platform_data *pdata = NULL;
#else
struct adv7180_platform_data *pdata =
client->dev.platform_data;
#endif
struct v4l2_subdev *sd;
int i, ret;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
#if defined(CONFIG_SOC_CAMERA)
if (icd) {
icl = to_soc_camera_link(icd);
if (!icl || !icl->priv) {
v4l_err(client, "missing platform data!\n");
return -EINVAL;
}
pdata = icl->priv;
icd->ops = &adv7180_soc_ops;
v4l_info(client, "soc-camera support enabled\n");
}
#endif
state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
if (state == NULL) {
ret = -ENOMEM;
goto err;
}
state->irq = client->irq;
INIT_WORK(&state->work, adv7180_work);
mutex_init(&state->mutex);
state->autodetect = true;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
if (pdata)
for (i = 0; pdata[i].reg >= 0; i++) {
printk("----> %x %x\n", pdata[i].reg,
pdata[i].val);
ret = i2c_smbus_write_byte_data(client,
pdata[i].reg, pdata[i].val);
if (ret < 0)
goto err_unreg_subdev;
}
Rodolfo
--
GNU/Linux Solutions e-mail: giometti@xxxxxxxxxxxx
Linux Device Driver giometti@xxxxxxxx
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
