The l parameter defines the number of clock cycles to process a single pixel per OP lane. It is calculated based on a new register op_bits_per_lane. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> --- drivers/media/i2c/ccs-pll.c | 19 +++++++++++++------ drivers/media/i2c/ccs-pll.h | 2 ++ drivers/media/i2c/ccs/ccs-core.c | 1 + 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c index ace2c2f352a9..8996f30c1e3b 100644 --- a/drivers/media/i2c/ccs-pll.c +++ b/drivers/media/i2c/ccs-pll.c @@ -162,7 +162,7 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, const struct ccs_pll_branch_limits_bk *op_lim_bk, struct ccs_pll *pll, struct ccs_pll_branch_fr *op_pll_fr, struct ccs_pll_branch_bk *op_pll_bk, uint32_t mul, - uint32_t div) + uint32_t div, uint32_t l) { uint32_t sys_div; uint32_t best_pix_div = INT_MAX >> 1; @@ -252,10 +252,15 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, op_pll_fr->pll_op_clk_freq_hz = op_pll_fr->pll_ip_clk_freq_hz * op_pll_fr->pll_multiplier; - op_pll_bk->pix_clk_div = pll->bits_per_pixel - * pll->op_lanes / pll->csi2.lanes; + if (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL) + op_pll_bk->pix_clk_div = pll->bits_per_pixel + * pll->op_lanes / pll->csi2.lanes / l; + else + op_pll_bk->pix_clk_div = pll->bits_per_pixel / l; + op_pll_bk->pix_clk_freq_hz = op_pll_bk->sys_clk_freq_hz / op_pll_bk->pix_clk_div; + dev_dbg(dev, "op_pix_clk_div: %u\n", op_pll_bk->pix_clk_div); if (pll->flags & CCS_PLL_FLAG_NO_OP_CLOCKS) { @@ -291,7 +296,7 @@ __ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, dev_dbg(dev, "scale_m: %u\n", pll->scale_m); min_vt_div = DIV_ROUND_UP(op_pll_bk->pix_clk_div * op_pll_bk->sys_clk_div * pll->scale_n - * pll->vt_lanes, + * pll->vt_lanes * l, pll->op_lanes * vt_op_binning_div * pll->scale_m); @@ -406,6 +411,8 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, uint16_t min_op_pre_pll_clk_div; uint16_t max_op_pre_pll_clk_div; uint32_t mul, div; + uint32_t l = (!pll->op_bits_per_lane || + pll->op_bits_per_lane >= pll->bits_per_pixel) ? 1 : 2; uint32_t i; int rval = -EINVAL; @@ -444,7 +451,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, pll->pixel_rate_csi = op_pll_bk->pix_clk_freq_hz * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? - pll->csi2.lanes : 1); + pll->csi2.lanes : 1) / l; /* Figure out limits for OP pre-pll divider based on extclk */ dev_dbg(dev, "min / max op_pre_pll_clk_div: %u / %u\n", @@ -482,7 +489,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, (pll->flags & CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER) ? 1 : 2 - (op_pll_fr->pre_pll_clk_div & 1)) { rval = __ccs_pll_calculate(dev, lim, op_lim_fr, op_lim_bk, pll, - op_pll_fr, op_pll_bk, mul, div); + op_pll_fr, op_pll_bk, mul, div, l); if (rval) continue; diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h index 7c2b7a85de6a..dd97cd6dca0d 100644 --- a/drivers/media/i2c/ccs-pll.h +++ b/drivers/media/i2c/ccs-pll.h @@ -75,6 +75,7 @@ struct ccs_pll_branch_bk { * @scale_m: Downscaling factor, M component, [16, max] (input) * @scale_n: Downscaling factor, N component, typically 16 (input) * @bits_per_pixel: Bits per pixel on the output data bus (input) + * @op_bits_per_lane: Number of bits per OP lane (input) * @flags: CCS_PLL_FLAG_* (input) * @link_freq: Chosen link frequency (input) * @ext_clk_freq_hz: External clock frequency, i.e. the sensor's input clock @@ -99,6 +100,7 @@ struct ccs_pll { uint8_t scale_m; uint8_t scale_n; uint8_t bits_per_pixel; + uint8_t op_bits_per_lane; uint16_t flags; uint32_t link_freq; uint32_t ext_clk_freq_hz; diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c index 5f361eec2006..7ba5e7b0f2f7 100644 --- a/drivers/media/i2c/ccs/ccs-core.c +++ b/drivers/media/i2c/ccs/ccs-core.c @@ -3201,6 +3201,7 @@ static int ccs_probe(struct i2c_client *client) if (CCS_LIM(sensor, CLOCK_TREE_PLL_CAPABILITY) & CCS_CLOCK_TREE_PLL_CAPABILITY_EXT_DIVIDER) sensor->pll.flags |= CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER; + sensor->pll.op_bits_per_lane = CCS_LIM(sensor, OP_BITS_PER_LANE); sensor->pll.ext_clk_freq_hz = sensor->hwcfg.ext_clk; sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN); -- 2.27.0