Hi, After suspend/resume, I have my webcam no more working. The /dev/video0 file still exist, but the webcam won't be used until I do this : rmmod uvcvideo modprobe uvcvideo (2.6.31.8-0.1) This is may be caused by a bug somewhere. These are more information about my hardware : I have Microdia webcam `lsusb` Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera on openSUSE 11.2 `uname -a` Linux linux-l365 2.6.31.8-0.1-desktop #1 SMP PREEMPT 2009-12-15 23:55:40 +0100 i686 i686 i386 GNU/Linux `hwinfo --usb` : USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_c45_62c0_1_3_2_1_7_if0_logicaldev_input Unique ID: Uc5H.F0c0EBqBP10 Parent ID: k4bc.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0 SysFS BusID: 1-4:1.0 Hardware Class: unknown Model: "Microdia LG Webcam" Hotplug: USB Vendor: usb 0x0c45 "Microdia" Device: usb 0x62c0 "LG Webcam" Revision: "32.17" Serial ID: "1.3.2.1.7" Driver: "uvcvideo" Driver Modules: "uvcvideo" Device File: /dev/input/event8 Device Files: /dev/input/event8, /dev/char/13:72, /dev/input/by-id/usb-LG_Innotek_LG_Webcam_1.3.2.1.7-event-if00, /dev/input/by-path/pci-0000:00:1d.7-usb-0:4:1.0-event Device Number: char 13:72 Speed: 480 Mbps Module Alias: "usb:v0C45p62C0d3217dcEFdsc02dp01ic0Eisc01ip00" Driver Info #0: Driver Status: uvcvideo is active Driver Activation Cmd: "modprobe uvcvideo" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (Hub) If there is a scenario you propose me to do to detect from where comes the problem, I can apply it. Thanks, ik. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
