The virtual driver has now a minimal set of frequencies for a single transponder to be found by each DVB standard. Document it, and update related information about the simulated LNBf. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- Documentation/driver-api/media/drivers/vidtv.rst | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/Documentation/driver-api/media/drivers/vidtv.rst b/Documentation/driver-api/media/drivers/vidtv.rst index c9f62fcfdd9b..65115448c52d 100644 --- a/Documentation/driver-api/media/drivers/vidtv.rst +++ b/Documentation/driver-api/media/drivers/vidtv.rst @@ -62,6 +62,14 @@ When compiled as a module, run:: That's it! The bridge driver will initialize the tuner and demod drivers as part of its own initialization. +By default, it will accept the following frequencies: + + - 474 MHz for DVB-T/T2/C; + - 11,362 GHz for DVB-S/S2. + +For satellite systems, the driver simulates an universal extended +LNBf, with frequencies at Ku-Band, ranging from 10.7 GHz to 12.75 GHz. + You can optionally define some command-line arguments to vidtv. Command-line arguments to vidtv @@ -86,13 +94,13 @@ mock_tune_delay_msec Simulate a tune delay. Default 0. vidtv_valid_dvb_t_freqs - Valid DVB-T frequencies to simulate. + Valid DVB-T frequencies to simulate, in Hz. vidtv_valid_dvb_c_freqs - Valid DVB-C frequencies to simulate. + Valid DVB-C frequencies to simulate, in Hz. vidtv_valid_dvb_s_freqs - Valid DVB-C frequencies to simulate. + Valid DVB-S/S2 frequencies to simulate at Ku-Band, in kHz. max_frequency_shift_hz, Maximum shift in HZ allowed when tuning in a channel. -- 2.26.2
