Re: [PATCH v3] media: rcar-vin: Enable YDS bit depending on bus_width and data_shift

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lad,

Thanks for your work.

On 2020-09-15 02:45:32 +0300, Laurent Pinchart wrote:
> Hi Prabhakar,
> 
> Thank you for the patch.
> 
> On Sun, Sep 13, 2020 at 07:16:08PM +0100, Lad Prabhakar wrote:
> > Enable YDS bit if bus_width and data_shift is set to 8 in parallel mode
> > for MEDIA_BUS_FMT_UYVY8_2X8 format.
> > 
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > Changes for v3:
> > * Dropped BIT macro
> > * Introduced struct v4l2_fwnode_bus_parallel
> > 
> > Changes for v2:
> > * Dropped DT binding documentation patch
> > * Select the data pins depending on bus-width and data-shift
> > 
> > v1 -
> > https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=323799
> > ---
> >  drivers/media/platform/rcar-vin/rcar-core.c |  9 ++++-----
> >  drivers/media/platform/rcar-vin/rcar-dma.c  | 17 ++++++++++++++---
> >  drivers/media/platform/rcar-vin/rcar-vin.h  |  5 +++--
> >  3 files changed, 21 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
> > index 7440c8965d27..1149ab76cf5c 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-core.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-core.c
> > @@ -626,12 +626,11 @@ static int rvin_parallel_parse_v4l2(struct device *dev,
> >  
> >  	switch (vin->parallel->mbus_type) {
> >  	case V4L2_MBUS_PARALLEL:
> > -		vin_dbg(vin, "Found PARALLEL media bus\n");
> > -		vin->parallel->mbus_flags = vep->bus.parallel.flags;
> > -		break;
> >  	case V4L2_MBUS_BT656:
> > -		vin_dbg(vin, "Found BT656 media bus\n");
> > -		vin->parallel->mbus_flags = 0;
> > +		vin_dbg(vin, "Found %s media bus\n",
> > +			vin->parallel->mbus_type == V4L2_MBUS_PARALLEL ?
> > +			"PARALLEL" : "BT656");
> 
> I'd write "parallel" and "BT.656".

I agree with this change.

> 
> > +		vin->parallel->bus = vep->bus.parallel;
> >  		break;
> >  	default:
> >  		vin_err(vin, "Unknown media bus type\n");
> > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> > index a5dbb90c5210..d067439b0b0d 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> > @@ -125,6 +125,7 @@
> >  #define VNDMR2_VPS		(1 << 30)
> >  #define VNDMR2_HPS		(1 << 29)
> >  #define VNDMR2_CES		(1 << 28)
> > +#define VNDMR2_YDS		(1 << 22)
> >  #define VNDMR2_FTEV		(1 << 17)
> >  #define VNDMR2_VLV(n)		((n & 0xf) << 12)
> >  
> > @@ -698,16 +699,26 @@ static int rvin_setup(struct rvin_dev *vin)
> >  
> >  	if (!vin->is_csi) {
> >  		/* Hsync Signal Polarity Select */
> > -		if (!(vin->parallel->mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
> > +		if (!(vin->parallel->bus.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
> >  			dmr2 |= VNDMR2_HPS;
> >  
> >  		/* Vsync Signal Polarity Select */
> > -		if (!(vin->parallel->mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
> > +		if (!(vin->parallel->bus.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
> >  			dmr2 |= VNDMR2_VPS;
> >  
> >  		/* Data Enable Polarity Select */
> > -		if (vin->parallel->mbus_flags & V4L2_MBUS_DATA_ENABLE_LOW)
> > +		if (vin->parallel->bus.flags & V4L2_MBUS_DATA_ENABLE_LOW)
> >  			dmr2 |= VNDMR2_CES;
> > +
> > +		switch (vin->mbus_code) {
> > +		case MEDIA_BUS_FMT_UYVY8_2X8:
> > +			if (vin->parallel->bus.bus_width == 8 &&
> 
> You can possibly drop this check, as UYVY8_2X8 implies a bus_width equal
> to 8. Apart from that,

I agree here as well, I think the check for UYVY8_2X8 may be dropped.

> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> > +			    vin->parallel->bus.data_shift == 8)
> > +				dmr2 |= VNDMR2_YDS;
> > +			break;
> > +		default:
> > +			break;
> > +		}
> >  	}
> >  
> >  	/*
> > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
> > index c19d077ce1cb..8396e0e45478 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-vin.h
> > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h
> > @@ -19,6 +19,7 @@
> >  #include <media/v4l2-ctrls.h>
> >  #include <media/v4l2-dev.h>
> >  #include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> >  #include <media/videobuf2-v4l2.h>
> >  
> >  /* Number of HW buffers */
> > @@ -92,7 +93,7 @@ struct rvin_video_format {
> >   * @asd:	sub-device descriptor for async framework
> >   * @subdev:	subdevice matched using async framework
> >   * @mbus_type:	media bus type
> > - * @mbus_flags:	media bus configuration flags
> > + * @bus:	media bus parallel configuration
> >   * @source_pad:	source pad of remote subdevice
> >   * @sink_pad:	sink pad of remote subdevice
> >   *
> > @@ -102,7 +103,7 @@ struct rvin_parallel_entity {
> >  	struct v4l2_subdev *subdev;
> >  
> >  	enum v4l2_mbus_type mbus_type;
> > -	unsigned int mbus_flags;
> > +	struct v4l2_fwnode_bus_parallel bus;

I think you could break this change (and the fallout) out to a separate 
patch to make the functional change clearer.

> >  
> >  	unsigned int source_pad;
> >  	unsigned int sink_pad;
> 
> -- 
> Regards,
> 
> Laurent Pinchart

-- 
Regards,
Niklas Söderlund



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux