Re: [PATCH v2] media: v4l2-ctrl: add control for long term reference.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/08/2020 08:59, dikshita@xxxxxxxxxxxxxx wrote:
> Hi Hans,
> 
> Thanks for your comments.
> 
> On 2020-08-25 15:34, Hans Verkuil wrote:
>> On 14/08/2020 07:29, Dikshita Agarwal wrote:
>>> LTR (Long Term Reference) frames are the frames that are encoded
>>> sometime in the past and stored in the DPB buffer list to be used
>>> as reference to encode future frames.
>>> This change adds controls to enable this feature.
>>>
>>> Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
>>> ---
>>>  .../userspace-api/media/v4l/ext-ctrls-codec.rst    | 23 ++++++++++++++++++++++
>>>  drivers/media/v4l2-core/v4l2-ctrls.c               |  6 ++++++
>>>  include/uapi/linux/v4l2-controls.h                 |  4 ++++
>>>  3 files changed, 33 insertions(+)
>>>
>>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> index d0d506a..6d1b005 100644
>>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>>> @@ -4272,3 +4272,26 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
>>>        - Selecting this value specifies that HEVC slices are expected
>>>          to be prefixed by Annex B start codes. According to :ref:`hevc`
>>>          valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
>>> +
>>> +``V4L2_CID_MPEG_VIDEO_LTRCOUNT (enum)``
>>
>> I prefer _LTR_COUNT (same for the other control defines).
>>
>> I assume 'enum' is a mistake? This should be 'integer', right?
> Right, I will correct it at all the places.
>>
>>> +    Specifies the number of Long Term Reference frames encoder needs to
>>> +    generate or keep.
>>> +    This control is used to query or configure the number of Long Term
>>> +    Reference frames.
>>
>> Add something like: "Applicable to the H264 and HEVC encoder."
> Sure.
>>
>>> +
>>> +``V4L2_CID_MPEG_VIDEO_MARKLTRFRAME (enum)``
>>> +    This control is used to mark current frame as Long Term Reference
>>> +    frame.
>>
>> enum -> integer
>> _MARK_LTR_FRAME
>>
>> How about renaming this to: "_FRAME_LTR_INDEX"?
> You are suggesting to rename it to V4L2_CID_MPEG_VIDEO_MARK_LTR_FRAME or V4L2_CID_MPEG_VIDEO_MARK_FRAME_LTR_INDEX ?

V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX

>>
>> I would also suggest having the range as 0..LTR_COUNT where 0 means that
>> this is not a LTR frame. An alternative is to have two controls: one boolean
>> that determines if the frame is a LTR frame or not, and one control containing
>> the LTR index.
>>
>> Is the LTR index 0 or 1 based according to the standard? I think that if it is
>> 1 based you can use 0 to mean 'not an LTR frame'. If it is 0 based in
>> the standard,
>> then having two controls might be better.
>>
>> A third alternative might be to use -1 as the value to indicate that it is not
>> an LTR frame, but it feels hackish. I'm not sure yet.
>>
> Could you please help me to understand how this info will be helpful?
> This control won't be set by client for every frame. So a frame for which this control is not set
> is not a LTR frame and a frame for which this control is set is a LTR frame and will be marked with
> LTR index ranging from 0 to LTR_COUNT-1 (range is according to standard)

This isn't how requests work. If a control is not set in a request, then it is assumed
that the control value is unchanged. So in this case, the previously set value for this
control will be used.

Regards,

	Hans

>>> +    this provides a Long Term Reference index that ranges from 0
>>> +    to LTR count-1 and then the particular frame will be marked with that
>>> +    Long Term Reference index.
>>
>> Add something like: "Applicable to the H264 and HEVC encoder."
> sure, will add.
>>
>> This only makes sense when used with requests, right? Otherwise you cannot
>> reliably associate this control with a frame. That should be mentioned here.
> Sure, will add.
>>
>>> +
>>> +``V4L2_CID_MPEG_VIDEO_USELTRFRAME (enum)``
>>
>> enum -> bitmask
>> _USE_LTR_FRAMES
> Will correct this in next patch.
>>
>>> +    Specifies the Long Term Reference frame(s) to be used for encoding
>>> +    the current frame.
>>> +    This provides a bitmask which consists of bits [0, 15]. A total of N
>>> +    LSB bits of this field are valid, where N is the maximum number of
>>> +    Long Term Reference frames supported.
>>> +    All the other bits are invalid and should be rejected.
>>> +    The LSB corresponds to the Long Term Reference index 0. Bit N-1 from
>>> +    the LSB corresponds to the Long Term Reference index max LTR count-1.
>>
>> Add something like: "Applicable to the H264 and HEVC encoder."
>>
>> This too only makes sense when using requests, correct? That should be mentioned
>> here.
> Sure, will do.
>>
>> I assume that this must be set to 0 for LTR frames? Or at least this
>> control will
>> be ignored for LTR frames.
> Yes, frames marked as LTR frames will not be encoded by using any other LTR frame as a reference.
> So this control won't be set for LTR frames.
> This will be set only for the frames which needs to be encoded by using an LTR frame as a reference.
>>
>>> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
>>> index 3f3fbcd..3138c72 100644
>>> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
>>> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
>>> @@ -991,6 +991,9 @@ const char *v4l2_ctrl_get_name(u32 id)
>>>      case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS:        return "HEVC Slice Parameters";
>>>      case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE:        return "HEVC Decode Mode";
>>>      case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE:        return "HEVC Start Code";
>>> +    case V4L2_CID_MPEG_VIDEO_LTRCOUNT:        return "LTR Count";
>>> +    case V4L2_CID_MPEG_VIDEO_MARKLTRFRAME:        return "Mark LTR";
>>> +    case V4L2_CID_MPEG_VIDEO_USELTRFRAME:        return "Use LTR";
>>
>> "Use LTR Frames"
>>
>>>
>>>      /* CAMERA controls */
>>>      /* Keep the order of the 'case's the same as in v4l2-controls.h! */
>>> @@ -1224,6 +1227,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
>>>          break;
>>>      case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
>>>      case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
>>> +    case V4L2_CID_MPEG_VIDEO_LTRCOUNT:
>>> +    case V4L2_CID_MPEG_VIDEO_MARKLTRFRAME:
>>> +    case V4L2_CID_MPEG_VIDEO_USELTRFRAME:
>>>          *type = V4L2_CTRL_TYPE_INTEGER;
>>>          break;
>>>      case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME:
>>> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
>>> index 6227141..f2daa86 100644
>>> --- a/include/uapi/linux/v4l2-controls.h
>>> +++ b/include/uapi/linux/v4l2-controls.h
>>> @@ -742,6 +742,10 @@ enum v4l2_cid_mpeg_video_hevc_size_of_length_field {
>>>  #define V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_L6_BR    (V4L2_CID_MPEG_BASE + 642)
>>>  #define V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES    (V4L2_CID_MPEG_BASE + 643)
>>>  #define V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR    (V4L2_CID_MPEG_BASE + 644)
>>> +#define V4L2_CID_MPEG_VIDEO_LTRCOUNT    (V4L2_CID_MPEG_BASE + 645)
>>> +#define V4L2_CID_MPEG_VIDEO_MARKLTRFRAME    (V4L2_CID_MPEG_BASE + 646)
>>> +#define V4L2_CID_MPEG_VIDEO_USELTRFRAME        (V4L2_CID_MPEG_BASE + 647)
>>> +
>>>
>>>  /*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
>>>  #define V4L2_CID_MPEG_CX2341X_BASE                (V4L2_CTRL_CLASS_MPEG | 0x1000)
>>>
>>
>> Regards,
>>
>>     Hans
> 
> Thanks,
> Dikshita




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux