On 04/09/2020 15:17, Marek Szyprowski wrote:
> Use recently introduced common wrappers operating directly on the struct
> sg_table objects and scatterlist page iterators to make the code a bit
> more compact, robust, easier to follow and copy/paste safe.
>
> No functional change, because the code already properly did all the
> scatterlist related calls.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
Acked-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Note that I agree with Marek to keep returning -EIO. If we want to propagate
low-level errors, then that should be done in a separate patch. But I think EIO
is fine.
Regards,
Hans
> ---
> .../common/videobuf2/videobuf2-dma-contig.c | 34 ++++++++-----------
> .../media/common/videobuf2/videobuf2-dma-sg.c | 32 +++++++----------
> .../common/videobuf2/videobuf2-vmalloc.c | 12 +++----
> 3 files changed, 31 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
> index ec3446cc45b8..1b242d844dde 100644
> --- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
> +++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
> @@ -58,10 +58,10 @@ static unsigned long vb2_dc_get_contiguous_size(struct sg_table *sgt)
> unsigned int i;
> unsigned long size = 0;
>
> - for_each_sg(sgt->sgl, s, sgt->nents, i) {
> + for_each_sgtable_dma_sg(sgt, s, i) {
> if (sg_dma_address(s) != expected)
> break;
> - expected = sg_dma_address(s) + sg_dma_len(s);
> + expected += sg_dma_len(s);
> size += sg_dma_len(s);
> }
> return size;
> @@ -103,8 +103,7 @@ static void vb2_dc_prepare(void *buf_priv)
> if (!sgt)
> return;
>
> - dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir);
> + dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
> }
>
> static void vb2_dc_finish(void *buf_priv)
> @@ -115,7 +114,7 @@ static void vb2_dc_finish(void *buf_priv)
> if (!sgt)
> return;
>
> - dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
> + dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
> }
>
> /*********************************************/
> @@ -275,8 +274,8 @@ static void vb2_dc_dmabuf_ops_detach(struct dma_buf *dbuf,
> * memory locations do not require any explicit cache
> * maintenance prior or after being used by the device.
> */
> - dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
> @@ -301,8 +300,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
> - dma_unmap_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC);
> attach->dma_dir = DMA_NONE;
> }
>
> @@ -310,9 +309,8 @@ static struct sg_table *vb2_dc_dmabuf_ops_map(
> * mapping to the client with new direction, no cache sync
> * required see comment in vb2_dc_dmabuf_ops_detach()
> */
> - sgt->nents = dma_map_sg_attrs(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> - if (!sgt->nents) {
> + if (dma_map_sgtable(db_attach->dev, sgt, dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
> @@ -455,8 +453,8 @@ static void vb2_dc_put_userptr(void *buf_priv)
> * No need to sync to CPU, it's already synced to the CPU
> * since the finish() memop will have been called before this.
> */
> - dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC);
> pages = frame_vector_pages(buf->vec);
> /* sgt should exist only if vector contains pages... */
> BUG_ON(IS_ERR(pages));
> @@ -553,9 +551,8 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
> - sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> - if (sgt->nents <= 0) {
> + if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC)) {
> pr_err("failed to map scatterlist\n");
> ret = -EIO;
> goto fail_sgt_init;
> @@ -577,8 +574,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
> return buf;
>
> fail_map_sg:
> - dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
>
> fail_sgt_init:
> sg_free_table(sgt);
> diff --git a/drivers/media/common/videobuf2/videobuf2-dma-sg.c b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> index 0a40e00f0d7e..0dd3b19025e0 100644
> --- a/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> +++ b/drivers/media/common/videobuf2/videobuf2-dma-sg.c
> @@ -148,9 +148,8 @@ static void *vb2_dma_sg_alloc(struct device *dev, unsigned long dma_attrs,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
> - sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> - if (!sgt->nents)
> + if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC))
> goto fail_map;
>
> buf->handler.refcount = &buf->refcount;
> @@ -186,8 +185,8 @@ static void vb2_dma_sg_put(void *buf_priv)
> if (refcount_dec_and_test(&buf->refcount)) {
> dprintk(1, "%s: Freeing buffer of %d pages\n", __func__,
> buf->num_pages);
> - dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC);
> if (buf->vaddr)
> vm_unmap_ram(buf->vaddr, buf->num_pages);
> sg_free_table(buf->dma_sgt);
> @@ -204,8 +203,7 @@ static void vb2_dma_sg_prepare(void *buf_priv)
> struct vb2_dma_sg_buf *buf = buf_priv;
> struct sg_table *sgt = buf->dma_sgt;
>
> - dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir);
> + dma_sync_sgtable_for_device(buf->dev, sgt, buf->dma_dir);
> }
>
> static void vb2_dma_sg_finish(void *buf_priv)
> @@ -213,7 +211,7 @@ static void vb2_dma_sg_finish(void *buf_priv)
> struct vb2_dma_sg_buf *buf = buf_priv;
> struct sg_table *sgt = buf->dma_sgt;
>
> - dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir);
> + dma_sync_sgtable_for_cpu(buf->dev, sgt, buf->dma_dir);
> }
>
> static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
> @@ -256,9 +254,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
> * No need to sync to the device, this will happen later when the
> * prepare() memop is called.
> */
> - sgt->nents = dma_map_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents,
> - buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> - if (!sgt->nents)
> + if (dma_map_sgtable(buf->dev, sgt, buf->dma_dir,
> + DMA_ATTR_SKIP_CPU_SYNC))
> goto userptr_fail_map;
>
> return buf;
> @@ -284,8 +281,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
>
> dprintk(1, "%s: Releasing userspace buffer of %d pages\n",
> __func__, buf->num_pages);
> - dma_unmap_sg_attrs(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir,
> - DMA_ATTR_SKIP_CPU_SYNC);
> + dma_unmap_sgtable(buf->dev, sgt, buf->dma_dir, DMA_ATTR_SKIP_CPU_SYNC);
> if (buf->vaddr)
> vm_unmap_ram(buf->vaddr, buf->num_pages);
> sg_free_table(buf->dma_sgt);
> @@ -408,8 +404,7 @@ static void vb2_dma_sg_dmabuf_ops_detach(struct dma_buf *dbuf,
>
> /* release the scatterlist cache */
> if (attach->dma_dir != DMA_NONE)
> - dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
> @@ -434,15 +429,12 @@ static struct sg_table *vb2_dma_sg_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
> - dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
> attach->dma_dir = DMA_NONE;
> }
>
> /* mapping to the client with new direction */
> - sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - dma_dir);
> - if (!sgt->nents) {
> + if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
> diff --git a/drivers/media/common/videobuf2/videobuf2-vmalloc.c b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
> index c66fda4a65e4..bf5ac63a5742 100644
> --- a/drivers/media/common/videobuf2/videobuf2-vmalloc.c
> +++ b/drivers/media/common/videobuf2/videobuf2-vmalloc.c
> @@ -229,7 +229,7 @@ static int vb2_vmalloc_dmabuf_ops_attach(struct dma_buf *dbuf,
> kfree(attach);
> return ret;
> }
> - for_each_sg(sgt->sgl, sg, sgt->nents, i) {
> + for_each_sgtable_sg(sgt, sg, i) {
> struct page *page = vmalloc_to_page(vaddr);
>
> if (!page) {
> @@ -259,8 +259,7 @@ static void vb2_vmalloc_dmabuf_ops_detach(struct dma_buf *dbuf,
>
> /* release the scatterlist cache */
> if (attach->dma_dir != DMA_NONE)
> - dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
> sg_free_table(sgt);
> kfree(attach);
> db_attach->priv = NULL;
> @@ -285,15 +284,12 @@ static struct sg_table *vb2_vmalloc_dmabuf_ops_map(
>
> /* release any previous cache */
> if (attach->dma_dir != DMA_NONE) {
> - dma_unmap_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - attach->dma_dir);
> + dma_unmap_sgtable(db_attach->dev, sgt, attach->dma_dir, 0);
> attach->dma_dir = DMA_NONE;
> }
>
> /* mapping to the client with new direction */
> - sgt->nents = dma_map_sg(db_attach->dev, sgt->sgl, sgt->orig_nents,
> - dma_dir);
> - if (!sgt->nents) {
> + if (dma_map_sgtable(db_attach->dev, sgt, dma_dir, 0)) {
> pr_err("failed to map scatterlist\n");
> mutex_unlock(lock);
> return ERR_PTR(-EIO);
>
