Hi Sakari, Sowjanya,
On Tue, Sep 08, 2020 at 12:33:41PM +0300, Sakari Ailus wrote:
> On Thu, Sep 03, 2020 at 09:40:57AM -0700, Sowjanya Komatineni wrote:
> >
> > On 9/3/20 9:35 AM, Jacopo Mondi wrote:
> > > Hi Sowjanya,
> > >
> > > On Thu, Sep 03, 2020 at 09:05:27AM -0700, Sowjanya Komatineni wrote:
> > > > On 9/3/20 5:55 AM, Jacopo Mondi wrote:
> > > > > Hello Sowjanya,
> > > > >
> > > > > On Tue, Sep 01, 2020 at 07:04:37PM -0700, Sowjanya Komatineni wrote:
> > > > > > This patch adds IMX274 optional external clock input and voltage
> > > > > > supplies to device tree bindings.
> > > > > >
> > > > > > Reviewed-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
> > > > > > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> > > > > > ---
> > > > > > .../devicetree/bindings/media/i2c/sony,imx274.yaml | 21 +++++++++++++++++++++
> > > > > > 1 file changed, 21 insertions(+)
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> > > > > > index 7ae47a6..57e7176 100644
> > > > > > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
> > > > > > @@ -25,6 +25,27 @@ properties:
> > > > > > reset-gpios:
> > > > > > maxItems: 1
> > > > > >
> > > > > I just sent an update to my json-schema conversion of this bindings
> > > > > document (not yet on patchwork, sorry) and Sakari pointed me to the
> > > > > fact in between my v2 and my v4 this patch from you went in:
> > > > > 4ea3273d24b ("dt-bindings: media: imx274: Add optional input clock and supplies")
> > > > >
> > > > > I should probably now update my bindings conversion patch, basically
> > > > > taking in what you've done here, but I would have one question.
> > > > >
> > > > > > + clocks:
> > > > > > + maxItems: 1
> > > > > > + description: Reference to the sensor input clock
> > > > > > +
> > > > > > + clock-names:
> > > > > > + maxItems: 1
> > > > > > + items:
> > > > > > + - const: inck
> > > > > > +
> > > > > > + vana-supply:
> > > > > > + description:
> > > > > > + Analog voltage supply, 2.8 volts
> > > > > > +
> > > > > > + vdig-supply:
> > > > > > + description:
> > > > > > + Digital IO voltage supply, 1.8 volts
> > > > > > +
> > > > > > + vddl-supply:
> > > > > > + description:
> > > > > > + Digital core voltage supply, 1.2 volts
> > > > > 4ea3273d24b introduced these regulators as VANA-supply, VDIG-supply
> > > > > and VDDL-supply (please note the upper-case names). This version uses
> > > > > lower-case ones instead. Is this intentional ? The driver currently
> > > > > does not parse any of these if I'm not mistaken, but as the bindings
> > > > > in textual form defines an ABI which should be preserved during the
> > > > > conversion to json-schema, should these be kept in upper-case ?
> > > > >
> > > > > Thanks
> > > > > j
> > > > Yes, based on feedback lower case was recommended. So, changed to use
> > > > lower-case names.
> > > >
> > > > These properties were not used by driver currently and from my prior series
> > > > only dt-binding got merged as no feedback was received on it for all prior
> > > > versions.
> > > >
> > > > So, should be ok to change to lower-case as there properties are introduced
> > > > now and driver update using these properties is under review
> > > >
> > > Well, I see that patch went in v5.9-rc1, so it will be part of v5.9.
> > >
> > > If the bindings update goes in in v5.10 (or whatever comes after v5.9)
> > > then we have a problem, as the DTB created for v5.9 won't work anymore
> > > on any later version, and that should not happen. Alternatively, a fix
> > > for the next -rc release could be fast-tracked, but you would
> > > need to synchronize with the dt maintainers for that and make a patch
> > > for the existing .txt bindings file.
> > >
> > > If the name change happens in the yaml file and one release is made
> > > with the old names, then we're stuck with those forever and ever, if I
> > > got the situation right.
> > >
> > > Please check with the dt and media maintainers, or they can comment
> > > here if they glance through these lines.
> > >
> > > Thanks
> > > j
> >
> > Hi Leon Luo,
> >
> > I used upper case for regulator supply names in all prior 4 versions of
> > IMX274 patch series as I see some other media i2c drivers doing it and
> > dt-binding patch from v3 got merged in 5.9-rc1 which was using upper-case.
> >
> > Later received feedback from Sakari requesting to use lower-case names so
> > updated to use lower case name now in v5.
> >
> > Not sure if we have timeline to squeeze in patch to change names to
> > lower-case before they get into 5.10.
> >
> > Can you please comment?
>
> We can merge patches through the fixes branch if needed. That is not an
> issue.
>
Good! So I'll make a v5 of the json-schema bindings soon that includes
the lower-case supplies and clock names and let's merge it as a fix in
this release cycle.
Sowjanya is this ok with you ?
Sakari, I'll then trust you to fast-track the patch if no other
issues!
Thanks
j
> >
> > Sakari,
> >
> > Can you also help understand why can't we keep upper case for regulator
> > supplies?
> >
> > I see some other media i2c drivers using upper case as well.
>
> The vast majority of bindings use lower case, that's it, simply.
>
> --
> Regards,
>
> Sakari Ailus
