Hi All,
I bought this low-cost TV/FM card and it seems my linux box doesn't recognize it.
I'm not sure what bit of info to use to attempt to force it to a specific card.
Any help would be appreciated.
Here's my info. I can provide an image of the card if needed.
Thanks.
--ernie
OpenSuse 15.2 (Kernel 5.3.18)
erniep@gracie:~$ dmesg | grep saa7134
[ 12.004761] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 12.005210] saa7134: saa7134[0]: found at 0000:07:04.0, rev: 1, irq: 16, latency: 64, mmio: 0xf9fffc00
[ 12.005217] saa7134: saa7134: Board is currently unknown. You might try to use the card=<nr>
saa7134: insmod option to specify which board do you have, but this is
saa7134: somewhat risky, as might damage your card. It is better to ask
saa7134: for support at linux-media@xxxxxxxxxxxxxxx.
saa7134: The supported cards are:
[ 12.005219] saa7134: saa7134: card=0 -> UNKNOWN/GENERIC
.
.
.
[ 12.005881] saa7134: saa7134: card=196 -> SnaZio* TVPVR PRO 1779:13cf
[ 12.005886] saa7134: saa7134[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 12.006271] saa7134: saa7134[0]: board init: gpio is 70c000
[ 12.112568] saa7134: saa7134[0]: Huh, no eeprom present (err=-5)?
[ 12.112837] saa7134: saa7134[0]: registered device video0 [v4l2]
[ 12.112917] saa7134: saa7134[0]: registered device vbi0
[ 12.174607] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded
[ 12.174648] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xf9fffc00 irq 16 registered as card -1
07:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
Subsystem: Philips Semiconductors SAA713x-based TV tuner card [1131:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
00: 31 11 34 71 06 00 90 02 01 00 80 04 00 40 00 00
10: 00 fc ff f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 31 11 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0f 01 0f 26
40: 01 00 01 06 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
--ernie
--ernie
