Hi Laurent,
On Fri, Sep 04, 2020 at 04:20:00AM +0300, Laurent Pinchart wrote:
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Aug 24, 2020 at 08:04:05PM +0100, Lad Prabhakar wrote:
> > Add support to read the bus-type and enable BT656 mode if needed.
> >
> > Also fail probe if unsupported bus_type is detected.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/ov772x.c | 32 ++++++++++++++++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> >
> > diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> > index 2cc6a678069a..67764d647526 100644
> > --- a/drivers/media/i2c/ov772x.c
> > +++ b/drivers/media/i2c/ov772x.c
> > @@ -31,6 +31,7 @@
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > #include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > #include <media/v4l2-image-sizes.h>
> > #include <media/v4l2-subdev.h>
> >
> > @@ -434,6 +435,7 @@ struct ov772x_priv {
> > #ifdef CONFIG_MEDIA_CONTROLLER
> > struct media_pad pad;
> > #endif
> > + struct v4l2_fwnode_endpoint ep;
> > };
> >
> > /*
> > @@ -581,6 +583,13 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
> > if (priv->streaming == enable)
> > goto done;
> >
> > + if (priv->ep.bus_type == V4L2_MBUS_BT656) {
> > + ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
> > + enable ? ITU656_ON_OFF : ~ITU656_ON_OFF);
> > + if (ret)
> > + goto done;
> > + }
> > +
> > ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
> > enable ? 0 : SOFT_SLEEP_MODE);
> > if (ret)
> > @@ -1354,6 +1363,7 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = {
> >
> > static int ov772x_probe(struct i2c_client *client)
> > {
> > + struct fwnode_handle *endpoint;
> > struct ov772x_priv *priv;
> > int ret;
> > static const struct regmap_config ov772x_regmap_config = {
> > @@ -1415,6 +1425,28 @@ static int ov772x_probe(struct i2c_client *client)
> > goto error_clk_put;
> > }
> >
> > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
> > + NULL);
> > + if (!endpoint) {
> > + dev_err(&client->dev, "endpoint node not found\n");
> > + ret = -EINVAL;
> > + goto error_clk_put;
> > + }
> > +
> > + ret = v4l2_fwnode_endpoint_parse(endpoint, &priv->ep);
>
> v4l2_fwnode_endpoint_parse() is deprecated for new drivers,
> v4l2_fwnode_endpoint_alloc_parse() is recommended instead. Please note
> that v4l2_fwnode_endpoint_free() then needs to be called in the error
> path and in remove().
Doesn't alloc_parse() differ from just _parse() as it reserve space
for the 'link-frequencies' array ? As this device does not support
CSI-2 and the 'link-frequencies' property is not allows in bindings,
isn't using endpoint_parse() better as it saves a call to _free() ?
Or are we deprecating that function unconditionally ? The
documentation suggests "please use v4l2_fwnode_endpoint_alloc_parse()
in new drivers" but here it doesn't seem required..
>
> On the other hand, not setting .bus_type and letting the parse()
> function determine the but type automatically is also deprecated, and I
> don't think forcing drivers to call v4l2_fwnode_endpoint_alloc_parse()
> once for each bus type until one succeeds is a good API. As change will
> be needed in that API, you can ignore v4l2_fwnode_endpoint_alloc_parse()
> for the time being if you want.
But indeed relying on auto-guessing of the bus type is deprecated since
some time now (and the API could be improved, yes). Sorry I missed
that yesterday.
As we support parallel and bt.656 only I must be honest I don't mind
it here as otherwise the code would be more complex for no real gain,
but I defer this to Sakari which has been fighting the battle against
auto-guessing since a long time now :)
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> > + fwnode_handle_put(endpoint);
> > + if (ret) {
> > + dev_err(&client->dev, "Could not parse endpoint\n");
> > + goto error_clk_put;
> > + }
> > +
> > + if (priv->ep.bus_type != V4L2_MBUS_PARALLEL &&
> > + priv->ep.bus_type != V4L2_MBUS_BT656) {
> > + dev_err(&client->dev, "Unsupported bus type %d\n",
> > + priv->ep.bus_type);
> > + goto error_clk_put;
> > + }
> > +
> > ret = ov772x_video_probe(priv);
> > if (ret < 0)
> > goto error_gpio_put;
>
> --
> Regards,
>
> Laurent Pinchart
