Add YAML device tree bindings for Galaxycore Inc. GC5035 imaging sensor. Signed-off-by: Tomasz Figa <tfiga@xxxxxxxxxxxx> --- .../devicetree/bindings/media/i2c/gc5035.yaml | 142 ++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/gc5035.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/gc5035.yaml b/Documentation/devicetree/bindings/media/i2c/gc5035.yaml new file mode 100644 index 000000000000..cf8cc3b581cf --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/gc5035.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2019 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/gc5035.yaml +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Galaxycore Inc. GC5035 CMOS Sensor Device Tree Bindings + +maintainers: + - Tomasz Figa <tfiga@xxxxxxxxxxxx> + +description: |- + The Galaxycore Inc. GC5035 is a 5 megapixel, 1/5 inch CMOS 10-bit Bayer image + sensor that delivers 2592x1944 at 30fps. This chip is programmable through + an I2C interface. The image output is available via a MIPI CSI-2 interface. + +properties: + compatible: + const: galaxycore,gc5035 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Input clock for the sensor. + items: + - const: inclk + + clock-frequency: + description: + Frequency of the inclk clock in Hz. + + iovdd-supply: + description: + Regulator driving the I/O power rail. + + avdd28-supply: + description: + Regulator driving the analog power rail. + + dvdd12-supply: + description: + Regulator driving the digital power rail. + + resetb-gpios: + description: + The GPIO pin that drives the RESETB signal, controlling sensor reset. + The RESETB signal must be driven low to activate the reset, so the + GPIO_ACTIVE_LOW flag should be given by default. + + pwdn-gpios: + description: + The GPIO pin that drives the PWDN signal, controlling sensor power-down + mode. The PWDN signal must be driven low to activate the power-down + mode, so the GPIO_ACTIVE_LOW flag should be given by default. + + port: + type: object + additionalProperties: false + description: + A node containing an output port node with an endpoint definition + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + endpoint: + type: object + additionalProperties: false + + properties: + data-lanes: + items: + - const: 1 + - const: 2 + + link-frequencies: true + remote-endpoint: true + + required: + - data-lanes + - link-frequencies + - remote-endpoint + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - iovdd-supply + - avdd28-supply + - dvdd12-supply + - resetb-gpios + - pwdn-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + gc5035: camera@10 { + compatible = "galaxycore,gc5035"; + reg = <0x10>; + + reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pio 112 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cam_osc>; + clock-names = "inclk"; + clock-frequency = <24000000>; + + avdd28-supply = <&mt6358_vcama2_reg>; + dvdd12-supply = <&mt6358_vcamd_reg>; + iovdd-supply = <&mt6358_vcamio_reg>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <438000000>; + }; + }; + }; + }; +... + -- 2.28.0.402.g5ffc5be6b7-goog
