Hello, This series adds YAML DT binding and V4L2 sub-device driver for Omnivision's OV02A10 2-megapixel 10-bit RAW CMOS 1/5" sensor, which has a single MIPI lane interface and uses the I2C bus for control and the CSI-2 bus for data. The driver is implemented with V4L2 framework. - Async registered as a V4L2 sub-device. - As the first component of camera system including Seninf, ISP pipeline. - A media entity that provides one source pad in common and two for dual-cam. Also this driver supports following features: - Manual exposure and analog gain control support - Vertical blanking control support - Test pattern support - Media controller support - Runtime PM support - Support resolution: 1600x1200 at 30FPS Previous versions of this patch-set can be found here: v13: https://lore.kernel.org/linux-media/20200710101850.4604-1-dongchun.zhu@xxxxxxxxxxxx/ v12: https://lore.kernel.org/linux-media/20200702115223.21507-1-dongchun.zhu@xxxxxxxxxxxx/ v11: https://lore.kernel.org/linux-media/20200630024942.20891-1-dongchun.zhu@xxxxxxxxxxxx/ v10: https://lore.kernel.org/linux-media/20200615122937.18965-3-dongchun.zhu@xxxxxxxxxxxx/ v09: https://lore.kernel.org/linux-media/20200523084103.31276-1-dongchun.zhu@xxxxxxxxxxxx/ v08: https://lore.kernel.org/linux-media/20200509080627.23222-1-dongchun.zhu@xxxxxxxxxxxx/ v07: https://lore.kernel.org/linux-media/20200430080924.1140-1-dongchun.zhu@xxxxxxxxxxxx/ v06: https://lore.kernel.org/linux-media/20191211112849.16705-1-dongchun.zhu@xxxxxxxxxxxx/ v05: https://lore.kernel.org/linux-media/20191104105713.24311-1-dongchun.zhu@xxxxxxxxxxxx/ v04: https://lore.kernel.org/linux-media/20190907092728.23897-1-dongchun.zhu@xxxxxxxxxxxx/ v03: https://lore.kernel.org/linux-media/20190819034331.13098-1-dongchun.zhu@xxxxxxxxxxxx/ v02: https://lore.kernel.org/linux-media/20190704084651.3105-1-dongchun.zhu@xxxxxxxxxxxx/ v01: https://lore.kernel.org/linux-media/20190523102204.24112-1-dongchun.zhu@xxxxxxxxxxxx/ Changes of v14 mainly address comments from Tomasz and Sakari. Compared to v13: - Fix imperfections in DT - Use an array property "ovti,mipi-clock-voltage" to indicate MIPI TX speed - Add the handler to the optional property "ovti,mipi-clock-voltage" in driver Please help to review this patch. Thanks. Dongchun Zhu (2): media: dt-bindings: media: i2c: Document OV02A10 bindings media: i2c: Add OV02A10 image sensor driver .../bindings/media/i2c/ovti,ov02a10.yaml | 161 +++ MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov02a10.c | 1083 ++++++++++++++++++++ 5 files changed, 1266 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml create mode 100644 drivers/media/i2c/ov02a10.c -- 2.9.2
